scatman
11/9/2006 5:51:04 PM
Tried my best to match up the colors. Putting this up for people (like me a few nights ago) who don't know how to take off the side plastics. Hope this helps.
Right Side: 
2 Pushpins on the bottom - take off with Phillips head screwdriver
2 Phillips head screws up the side
2 Pushpins on the inner part of the fairing - take off with small Phillips head screwdriver
3 Allan head screws from the front cowl
3 Allan head screws on the side
1 12mm bolt/spacer in the middle
1 Pull out of intake cover
Off Left Side: 
2 Phillips head screws up the side
2 Pushpins on inner part of the fairing – take off with Phillips head screwdriver
2 Allan head screws on the front cowl
3 Allan head screws on the side
1 Pull out of intake cover
Off
Glocker23
11/11/2006 10:01:43 AM
How about pics to remove the front of the bike to replace the stock turn signals
D2DGraphix_600RR
11/11/2006 2:39:51 PM
You have to take all of that off, plus the mirrors, the plastic screws underneath the front cowl, and disconnect the wire harnesses.
scatman
11/11/2006 4:44:14 PM
yea, i havent dont the turn signals yet. the ones on there came with the bike when i bought it. i dont have the original ones. when i decide to change those out, i'll post up another thread on how to do it....with pics...similar to this one.
