04+ HTEV leftovers? Help

Hey ya'll.

Installed my akro Ti today on my 06 cbr1000 and was wonder what the *&$^ to do with the two cables that are left over

*seen hangin below exhaust*



Please let me know what methods i must partake into to get these things either removed or placed out of harms way.

Thanks.

Adam

For now I have them zip-tied onto the left side of the bike where the back seat foot pegs were bolted onto.


Can these be removed easily?

Your posts are appreciated.

Thanks,

Adam

take them off of the servo
it is located in the same box that the lock for the rear seat cowl is located under the riders seat

to get to it
take off the riders seat and the rear cowling to get to everything
there is one of those plastic push pins with the cross head screw holding the box to the frame as well as
is a silver bolt under the riders seat
just wiggle the box until you see the screws that hold it in place
once the black box is loose you can see where the cables go into the servo
its best to mark the servo where it is compared to the frame because you will have to turn it to get the cables out
then put it back to the original position
some people get a FI light if they dont

after that bolt the black box back up and call it good

Right on.

I know exactly what sector your talking about.

Thanks for the info.

Adam