06 CBR1000RR Slipon Recomendations

Folks ... I have a CBR1000RR 06 Black. I have the Intake Flapper Mod and will be performing the PAIR mod. I have also wrapped the pipes to reduce heat.

My question is ... Which SlipOn (not full system) is best for this bike. I will also purchase a BMC filter ( K&N is to restrictive) and Power Commander. I will have a local shop do the DYNO and Mapping.

So could folks feed back with Vendor, HP, and Sound.

Thank You very much .... I will post this up to a couple of other Forumns then share results.

Brian

If you want power

Arata, Sato, Akro,

they are not cheap but they will make good power

you can find a write up on the power an arata can made compared to a jardine can at

http://hooliganbiketech.dynup.net/hondacbr1000rrweb/1000RR_frameindex.htm


this site also has sound clips

Great Site .... seems like the Sato was the best sounding. I will look for some Dyno Runs and compare.

satos do sound awesome

i ended up going with the arata because of the awesome deal that kneedraggers was having on them

power increase is pretty close to the same with either both have shown +10 on the dyno

I have the Jardine RT-1 w/ Race core. Sound is very nice. Deep and throaty. Price was awesome. I picked mine up at starcycle.com for only 200 bucks. Cannot beat that. Plus free delivery.

Devil Exhaust is nice. You stand out from the group.

MAGNUM EXHAUST SYSTEM (slip-on)

check out the site.

http://www.devilbikes.com/sound_examples.php

Leovince SBK factory slip-on works for my bike perfectly, and a great sound to

[image][/image]

Im with Brother Louie. I love the Leo Vince slip on.

for the most power go with arata or sato.

for a pipe that fills the backend up look at the arata, akra, jardine dual outlet, or the yosh rs-5.