rickybongos
5/5/2007 11:09:46 PM
I replaced my messed up wiring harness on my 1989 cbr600 with a nice one from a 1990 cbr600. Everything plugged right in perfectly until I got to the CDI box... This newer harness has 7 circular hookups on it. The older one had the normal tab style. Does anyone have the CDI box to go with this harness? Does anyone know a fix for this or can point me in the right direction?
I tried to do some research and THINK this is the model number for the box I need:
30410 - MT6 -870
Any help would be greatly appreciated. The bike is freshly painted and all is set to go except this one part!
Thanks,
-rickybongos
honda502
5/6/2007 12:10:38 AM
Can't you just splice in the plug from the old harness? Should be the same wire colors I think. I thought the harness would be the same from an 89 to a 90.
rickybongos
5/6/2007 1:13:39 PM
All seems the same except for the CDI box. Can't splice as one is 11 wire and the other is a 7 wire. Any help anyone?
supernaturalbeing
6/9/2007 10:11:23 PM
the 1990 adds sensors and only has one pulse generator
probably not interchangable but check schem and chapter two diagn...notes1990 dfifferences
