Clean-up underway on my 600F, I need some fasteners

OK !! I took all the fairings off, and degunked and detailed the inner part of my bike.
I need a few fairing fasteners to finish my assembly. (although the bike is back together) I have attached two pixs of three fasteners. Anybody have two of each (or one of each would get me by) fairing fasteners they can send me $$$ ? You can email me direct at captbruce@fishbruce.com...
also, anybody got a WHITE leftside Mirror off a 1990 600F ?? The bracket broke just before I took delivery. (attch.pix)... I found out I need a new rear tire 140/70/17 (dry rotting) and rear brake rotor too. Probably ready for a new chain too... Anyway, Luv the BIKE !! I hope to hear from anybody, Be Safe !! captbruce



Thumbnail Image



Thumbnail Image




Thumbnail Image

I normally go to a place like http://www.mrcycles.com and use their fiche finder parts catalog to look for the part #s and then I go to http://www.servicehonda.com/parts.php and order them, they are cheaper from there.

Thanks, rrasco... Thanks for the links. You couldn't have made it any easier.
The mirror was $87 discounted !! Yike !!
I might be putting the aftermarket ones on there. OR since I have the patients of a Buzzard, I might just keep scouring eBay. I do have 2000 successful eBay auctions under my belt... Is this a GREAT Country, or WHAT !! Thanks, again. captbruce

thats actually a good price for the mirrors, I might do that next summer :)  I have aftermarket ones on mine and they are tinny and buzz a LOT :(  www.bikebandit.com has a lot of stuff as well.

Hey Guys, It's not like I'm a "Cheap Operator", BUT... I "JB-Weld'ed" the PotMetal bracket back together and and reinstalled it. I'll see how it holds up and go from there.
I really can't believe how many of these CBR's I've seen were laid-down, at some point. Man, that's gotta Hurt !! And why doesn't Honda and the other Mfg'rs install frame-rollers as STANDARD equip.?? (too busy selling fairing parts probably). Anyway, I polished it and everything looks Cool !! I still need a rear tire and rear rotor (The rotor is in the WORST condition I ever seen a disc.) plain old SHOT !!
OK enough for now. Be Safe !! captbruce
 

post some pics up of the progress!  My buddy tried the jb weld on my mirror when it was still his bike.... I hope you have better luck lol!

OK !! I swear by JB Weld !! The break in the mirror Bracket was about 1-1/2" long (good coverage for JB) around the spring "break-away" system. I cleaned all parts with Laquer Thinner and oiled the breal-away so the JB would not stick to it.
I have had in on two days so far. I have secured the mirror body to the bracket with 300# clear monofiliment fishing line in case it comes off in traffic. "Trust NO one" !!
Hey, I'm just a "Fishing Guide" from Key West, Florida... what do I know...
anyway, I still looking for a white left hand mirror for my 1990 F1.
Be Safe !! captbruce


Thumbnail Image



Thumbnail Image

broke in the same place as mine lol!!  maybe my buddy didnt prep it properly...  I will have to try it again for sure :)  my father in law jb'd his wifes transmission oil pan back together when the corner broke off... and that was like 3 years ago and probably 40k miles lol!