mpbigham
10/31/2007 12:37:46 PM
i was riding yesterday, and i noticed when i would hit a bump, every gauge with a needle on my bike would bounce down, and come back up, the odometer would flip on and off too
any clues?
there is still power when this happens, the lights behind the gauges stay on
cbr6oo
10/31/2007 12:44:48 PM
Sounds like you have a short or loose conection somewhere....
§T®ÈÈT¿ÐÈMOÑ
10/31/2007 1:59:55 PM
sounds like a bad ground to loose everything like that or just a bad connection like cbr600 said, could be a bad solder joint in the cluster itself but i doubt it
Blue Fox
10/31/2007 2:56:53 PM
I bet your connector is dirty or loose. My car had a similar problem, and when I would hit a bump, the entire gauge cluster would turn off, and then flicker. I took out the gauge cluster and found the connections were loose. I would try that first, and if it still does it, check the ground like §T®ÈÈT¿ÐÈMOÑ said.
mpbigham
11/1/2007 7:58:14 AM
hey fellas
thanks for the input, i haven't had a chance to check it yet, but tommorow being friday and all, i'll look at it and get back
mpbigham
11/17/2007 4:10:08 PM
ok so i finally laid hands on my bike. i started at the battery. the positive cable's bolt had come undone. the bolt was still through, but there was no nut on it to keep it in place. got a new one, fixed the problem. ta da