[ View Full Version Of This Page ]

D.I.Y. LED Peg signals - Page 4

All Forums » How-To... » D.I.Y. LED Peg signals

Pages: 1 2 3 [4] 5 6 7 8
trixtrem
10/10/2006 6:06:27 PM
this mod is bloody brilliant, guess i have a busy weekend ahead!!!.... anything that makes you more visible is a good thing... thanks for the great write up, anyone else got soem finished pics?


just done mine. will post pics when it gets a bit darker.... thanx guys....

also here are some pics of the great cable splicers that i used to fit the lights... they are a banger.....


[img=http://img41.imagevenue.com/loc335/th_11402_plug_122_335lo.jpg]

here's a vid of my LED pegs.... yeah i know i'm proud
http://media.putfile.com/LED-turn-F4i

peace
trixtrem
10/15/2006 6:03:34 PM
here is a vid of my turns.. thanks for the how to... they turned out great


peace

http://media.putfile.com/LED-turn-F4i
Leveltwo
10/16/2006 4:16:33 PM
glad it turned out for ya
kash
10/17/2006 7:48:31 PM
Where can you get this type of LED's and is there a certain type, model or part number.
trixtrem
10/18/2006 4:45:26 AM
the leds i used were 15000MCD(micro candela power), also 150ohm resistor for each(for 12V) should be able to get them form a electronics store... hope this helps..



peace
Triax
10/18/2006 10:19:15 AM
how bright are those 15k LEDS? I'm waiting on mine from Hong Kong. I got 20 of them with the resistor and leads for only $15.
kash
10/18/2006 10:33:53 PM
what size did you used? 3, 5 or 10 mm?
trixtrem
10/19/2006 9:38:41 AM
us the 5mm ones mate, and get some of those led clips, that you put in the hole, i drilled the holes 6.5mm, and it was just big enough.... and regarding brightness, i think you could probably see them from space!!!!, check my post up a few and you will see what they are like at night, ..... i only put 3 in each pegmount!!!..


peace
asc
10/19/2006 12:46:57 PM
is it possible to wire the leds in as a brake light and a turn signal?

trixtrem
10/19/2006 7:05:33 PM
i think you could but would need you work out the resistance you would need for both the park lights and the brake lights, or you could run both the park and brake to the led with a single 150ohm i think, and you would get the dim and bright.... help me out ppl, or have i led him down the garden path?

peace
Blue Fox
10/21/2006 6:23:03 AM
That mod looks like of cool (though, I prefer the integrated signals into the taillight.....on the RR). Anyway, if you guys haven't checked it out yet, I used to do a LOT of LED mods for my car. I used this website for all my LED needs.

http://www.superbrightleds.com

Hope this helps. They have a LOT of LED products and such.
trixtrem
10/21/2006 9:15:21 AM
cheers for the link mate, its brilliant


peace
kash
10/28/2006 3:02:18 PM
I bought some LEDs from superbrightleds.com. Orange LED's part number: RL5-O4030 & part number: RL5-O5015 . Is this the correct bulb? Cause It kept on popping/burning out whenever I turn my signal on. I connect the wire correctly (Green /Black - & Red to +). What am I doing wrong? Please help.
trixtrem
10/28/2006 8:25:30 PM
mate did you fit resistors to each lead?... from memory they need to at least 150ohms, if you run straight 12V through them you will kill them...

resistor calculator

you should have all the appropriate info to fill in the blanks.

hope this helps...


peace
bushmasterAR15
10/29/2006 4:46:36 AM
I have a 600RR and I integrated 3 led's into each side of my tail fairing for blinkers. Looks sick, cost $9.99, and they blink normally. Bought them from Pep Boys for $4.99 per 3. Great mod.Heres a short vid. Dont be fooled, they are very bright in person my camera is dark for some reason.
http://s105.photobucket.com/albums/m220/bushmasterAR15/?action=view¤t=MOV00629.flv
D2DGraphix_600RR
11/3/2006 1:08:55 PM
I have been following this for a while. I was just wondering it anyone ended up doing this to their 600RR or 1000RR (I have an 06)and if so, do you haveany pictures? Just looks like the pegs are a little narrow on our bikes. I see a lot of people did it to their F4i. Also, did anyone lose their rear blinkers, or did you keep those too?
D2DGraphix_600RR
11/3/2006 5:03:51 PM
Mine arent working. Does anyone know why? Black.white on led to red/blue, and Black on led, to green. My fronts only turn off when I go to turn the blinker on
D2DGraphix_600RR
11/3/2006 11:50:52 PM
Got it to work, Finally!!

[image][/image]
trixtrem
11/4/2006 7:51:01 AM
well done man... looks awesome... makes you feel good when you get it sorted...

peace
D2DGraphix_600RR
11/4/2006 12:14:10 PM
Yea. I also added an extra L.E.D for a license plate light.
Triax
11/6/2006 8:47:53 PM
I just did it to he 929 when i added my undertail. Looks awesome and it was really easy to do.
bushmasterAR15
11/7/2006 12:36:31 AM
Does everyones blink fast? I keep hearing about this, but mine seem to work normally with no resisters. How bout yours D2MEclipse...?
Triax
11/7/2006 10:34:15 AM
Mine blink faster than normal but I like it, grabs people attention better.
D2DGraphix_600RR
11/7/2006 3:05:15 PM
Yea, mine blink fast now also. But, that may be because I change4d out the front singals too. They were normal when I just did the back. But I dont mind the faster blinking. What color did you do yours bushmaster?
D2DGraphix_600RR
11/7/2006 7:51:10 PM


Heres the light they give off at night
Pages: 1 2 3 [4] 5 6 7 8
Related Threads

[ View Full Version Of This Page ]

Return to the CBR Forum home page - Archive Home