hdiggeddy
2/28/2006 11:06:31 PM
I have a very small dent on my gas tank. There are no creases. I thought about using something like a Ding King but i was told that the metal would be too think. Anyone have any segestions?
eteller
3/2/2006 7:24:12 PM
Worked great on my f4i tank. I got one for christmas and used it with mixed results on my car, but the dime sized ding on my tank pulled out perfectly.
kiggy74
3/2/2006 7:34:49 PM
The thinner the metal the better for pop out dent removal. Its the really thick metal that won't pop and needs to be tapped out. Give it a try, you aren't going to make it worse. The worst thing that could happen is that you pull too far and it give yourself a nipple on your tank. That might make riding more fun if you think about it......
flashpoint
3/7/2006 12:02:41 PM
i used the ding king on my 05 ninja 500 about 3 months ago and it worked perfect. i recommend getting one and trying it on your F4i. i got mine at checker for about $30. its awesome.
brancart1
3/7/2006 7:34:45 PM
the tank is nothing more than a shell over the actual tank. you could take the shell off and then take a rubber mallet and work the ding out. ding should go back to normal after a few light hits.
kup125
3/7/2006 9:16:01 PM
smash the whole top of the tank flat and let the wheelies begin
brancart1
3/7/2006 10:19:37 PM
lol, i think Kup125 has the right idea
DThompson
3/9/2006 9:42:51 PM
Dont smash the tank! You can still do tank and highchair wheelies without the tank being smashed. Believe me, I KNOW
Daniel Thompson
