does anyone?? their is one red wire for the signal and one black wire for the ground but the factory connectors have three wires???
cbrrookie
8/8/2006 9:49:50 PM
the reason for three wires is that
1 is a ground
2dn is for blinking
3rd is for a continuous run
on my 04 cbr 1k there is a solid blue and a blue with a white stripe and a green
green is ground
blue is the blinking one
and I LEFT THE BLUE WITH WHITE STRIPE ALONE
Same with the color orange on left hand side
your putting aftermarket lights most of them don't have three wires. hope this helps...
