hibadrr
12/19/2005 5:02:25 AM
Aloha...I am building a 03 CBR 600 RR..When my exhaust clamp was loose..where header meets stock tailpipe, I noticed a few drops of water dripping out..the water was clear and all my fluid is antifreeze..is this some kind of condensation..Aloha, Tim, from Hawaii
hibadrr
12/19/2005 5:05:22 AM
Aloha,,which relay is for the fan...I see three relays on left side of frame..thanks, Tim also when should the fan turn on..
doncollins
12/19/2005 6:20:10 AM
I believe what you are seeing is just condensation
The fan will kick on at about 218/219 area and the fan relay is the middle one...
Anubis
12/19/2005 11:38:18 AM
Welcome to the Boards
Yeah i agree on the Condensation here in the uk on cooler damper morning you get quite alot of condesation coming out of the system in the mornings till the bike has warmed up.
pitsvtec
12/19/2005 2:02:35 PM
Hello & Welcome to the site....I agree with the condensation comment. Nothing to worry about...everything sweats a little bit...good luck with the bike.
Way2Cool
12/19/2005 3:26:45 PM
No worries that happend to me once its just condesation and welcome!!
chainstretcher
12/19/2005 6:32:10 PM
Not to geek ya out but the product of combustion is water and CO2 -- that's perfect combustion. In reality we all get a bit of CO and bits of unburned fuel. But the water is absolutely normal. Once the exhaust gets hot enough it just evaporates.
cjbettis
12/19/2005 11:03:16 PM
aloha, you are gonna like it here
