grwilson6
10/4/2006 5:45:48 PM
hey i bought a carbon slipon for a 1000rr but the clamp that holds the can didnt come with the usual rubber that protects it from scratchin. what can i use that wont melt? smooth move on my part for buyin somethin from italy, someone help me.
FATHEADS1KRR
10/4/2006 5:55:11 PM
Your looking for silicon sheet stock. You might think this sounds silly, but you can make your own by getting some hi-temp silicon and smoothing a big gob of it onto wax paper, and cutting out the strip you need after it cures. Easiest way would be to put the whole strip between the pipe and the clamp and mark out what you need to cut. Just make sure you buy good stuff and let it cure compleatly. You'd be surprised at how strong it is, even in thin strips.
baxsom
10/4/2006 6:36:32 PM
get that rubberized make a gasket sheet at an auto parts store
it is a rolled up sheet of rubberized paper that is used to custom make gaskets and such
works great
grwilson6
10/4/2006 7:32:04 PM
hey thanks guys i'm gonna try that.
