Orangebutter
4/10/2007 2:41:48 PM
I was wondering if anyone knows or have done the exhaust on a cbr WITHOUT taking all of the tail section off. In other words just cut the pipe right behind the muffler and then just slip the new muffler on.
myride
4/10/2007 6:02:13 PM
no you have to take the tail section off there is bolts under it for the muffler. i did mine i put on a hotbodies its easy to do
DWT74
4/10/2007 9:22:33 PM
The 1000 tail section comes off a whole lot easier than a 600RR tails do, they are shorter. Dont be afraid to bend it (spread) it a little not alot just enough to get the right side to clear the subframe then it will lift right off, dont forget your 4 wires on the left side, hope this helps
Orangebutter
4/11/2007 1:42:43 AM
I think I will give it a shot instead of having the dealer do another install and taking my leg. I was just curious if you could just cut the pipe just behind the muffler and install with a clamp of some sort. That way if you wanted to switch to another muffler it would be any easier thing to do. And it wouldn't take a few hours just minutes.
