[ View Full Version Of This Page ]

Frame slider question - Page 2

All Forums » CBR 600RR » Frame slider question

Pages: 1 [2]
samerr
1/10/2006 11:48:51 AM
no1biscuit - I believe you may be able to order the tool by itself from OES. You may want to give them a call.

http://www.oesaccessories.com/600RR.html
no1biscuit
1/10/2006 11:54:21 AM
I just emailed them. That would be awesome.

Thanks again for all of your help.

Thom
no1biscuit
1/16/2006 9:20:11 AM
Hi Guys/Gals,

I installed my Frame sliders Saturday/Sunday.

I bought the tool from
http://www.oesaccessories.com/600RR.html

and tried to use the instructions here
http://www.motovationusa.com/Install_CBR600RR.html

The tool worked great except that when you put the fairing back on to get the impression in the side you need to put all of the screws/bolt back on. I did not and they are both off just a hair forward. I don't think this would have happend if I would have put all of the bolts on.

The instructions from motovationusa.com states that you need a 12mm allen tool but it is really a 10mm tool.

Other than that it took about 5 hours. 5 hours? Why so long? Well if it wasn't for my buddy who said you need loctite on everything (he has a 04 gsxr1000). So it took me 2 and 1/2 hours to get the front left fairing off. Those little rubber grommits that hold the 3 front screws on spin instead of loosing when you have loctite on the threads and the bottom one is a bitch to get too the back side of it when the fairing is still on. What a mistake. If it wasn't for that I think I could have been done it about 2 hours.

Hope my stupidity helps others.
doncollins
1/16/2006 1:50:22 PM
pictures???
no1biscuit
1/16/2006 1:53:43 PM
I can get you before and afters only. I had the camera out and took the before pics and then I hit the first loctite bolt and I was so pissed that the camera did not come off the work bench again. I even said a bad word or two. (Don't tell my wife)
no1biscuit
1/16/2006 7:59:21 PM
Hey guys,
Does your left slider stick out farther than your right??


Thanks
Thom
doncollins
1/16/2006 10:45:16 PM
I have a quarter inch difference... my left side is 2" and the right is 1 3/4". Nothing you notice unless you have a tape on it. Thanks for bringing this to my OCD list.
no1biscuit
1/16/2006 11:01:47 PM
Mine doesn't qualify for OCD. My left sticks out 2-1/4" and my right is 1-5/8". WTF???


Thumbnail Image



Thumbnail Image
Pages: 1 [2]
Related Threads

[ View Full Version Of This Page ]

Return to the CBR Forum home page - Archive Home