How to get the rear fender off

Hi guys, Im going to install a TB exhaust on my 03 cbr 600 rr, and I the question is, how to u get the rear fender off?, I have all the screws off, but do u have to bend the plastic off to clear the subframe?, I just don't want to break it if I'm wrong.

Tks for the help

you should be able to slide it off the back if you have all of the screws out. dont forget about the lil black ones underneath. you are going to have to bend the plastic a lil bit. you will be surprised how flexible it is. good luck.

btw, what kind of exhaust did you get.

I can't resist...rear fender or rear cowl, because there is a huge difference in removal...

quote:

ORIGINAL: Fretless33

I can't resist...rear fender or rear cowl, because there is a huge difference in removal...

good question.....i was just assuming rear cowl

Tks for your help and yes it was the rear cowl.

A small piece of C4 or a stick of dynamite works wonders.

try this site http://www.peterverdonedesigns.com/CBR600RR.htm
scroll down under the bike drawings and there is a usefull link.