intergrated turn signal/brake light question

ok so i have my tail section off and i know where to plug in my brake light but for the turn signals, i have no clue.  the directions that came with them suck ass and dont tell me shit and im not that great with this kinda stuff anyways, so i need help.  there are 3 plugs plus the actual brake plug, white, blue, and another color i cant remember.  are those my turn signal wires?  and if so, does anyone know which is which?

Black or black with white stripe, some older CBR has it on brown should be for the tail light.
Left turn should be orange.
Right turn should be blue.
Blacks or greens, is ground.
 
Good luck ... hope this helps

+1 odyssey

thanks man, after i posted this, i just went down and started testing things out.  i figured out which is which, i just took the wire and stuck it in the plug hole and they started blinking.  now to cut the plugs off and see which wire i use is the only question now.  bc i believe once i cut the plug off there will be 3 wires not just one, i could be wrong tho, i couldnt tell bc the rubber harness was in the way.

Its a pain if you are going to use the resistors (you have to cut into the wire harness). What you want to do is cut the ends off of your stock blinkers, wire them up to your intergrated one, then you just connect the colors together and wala. Test them before putting your tail back on (so when you hit left it blinks left).

thats the thing, the guy that owned it before me took the factory blinkers off and when he took the tail section off he just disconnected them at the plugs. So instead of being able to do that I have to cut off the other plug then connect the blinker wire, but that'll leave 2 exposed wires.