JAPAN domestic 2006 CBR1000RR DE-RESTRICTION question

Dear everyone

I have a japan domestic 2006 cbr1000rr.
I know it is restricted with 94ps/88Nm.
I have just derestricted it with flapper mod, pair mod, airintake replacement, exhaust modification.

I must do wiring modification but I DO NOT know exactly wires have to cut.
Do you know about it ? Please give me advice.
I had a 2005 wire cutting diagram but ECU of 2005 and 2006 is different (connectors of 2006 have 2x33 pins, 2005 have 2x32 pins).

Thank you.

I have full wiring diagrams for all u.s. model 2004-2006.... Which ones would you like.

2006 please .

If you know how to do wiring with japanese domestic 2006 cbr1000rr to get full power back, please help me.

Thank you.

Nope I don't know the wiring trick... But I can get you a few nice pics of the 2006 wiring... I will post this up in about 10 hrs, when I get home from work.


But while you wait, try to a good internet search for the wiring trick. Someone has had to do it already.

Thank you. I 'm waiting for you.
Please send me 2005 too . I have wiring trick of 2005 but 2006 is different.

only 2hrs to go....

Still waiting...

Sorry I worked a double yesterday. They asked me at the last second. 18hrs @ work. I'll try and get to it today after work.

Thank you for accepting my request.

My email is --->le5trung4hieu@yahoo.com<---

I'm waiting....

I love that word "doubles" looks nice on payday.They do take take there toll sometimes we do two or three a week

quote:

ORIGINAL: Nevaeh Speed

Sorry I worked a double yesterday. They asked me at the last second. 18hrs @ work. I'll try and get to it today after work.

Yeah I did another double yesterday.. And yeah it's gonna look sweet on pay day... Anyhow I took a pic, my scanner is working like shit, so tell me if this will work for you.



Thats 1 out of 2 pages for the 06 cbr1000rr, I have 04-05 also.

I cannot read text on your picture.
Could you please read 2005 black/white (16) and green(28) and green (32) and compare it with same color wires on 2006 ? (all wires attached with ECU connector, grey and black)

Alright, been busy this weekend.... Working, working, working. But I'll try today... I'll try and dodge the manager, so I won't have to work a double. Hold tight.

I had seen a website one time that gave you a step by step walk through of how to do this.

It's the same motor, pistons, etc... same injectors etc.

It was basically just airflow.

There was a funky baffle in the intake, restrictors on the air filters, you needed to remove or drill out
the air funnels to the throttle bodies, and modify the exhaust. I believe you also needed to some some minor re-wiring
concerning the ECU, or perhaps install a USA or Euro spec ECU I cannot recall.

What plug are you talking about.. The ecm a or b.. Or what? I'm waiting on you jack.

04-05

ecm a

16= p/bu (secondry injector # 4)

ecm b

16= ties of alot..


2006

ecm a
16= nothing

ecm b
16= ties off alot like in th 05, but to different wires.

Thank you so much
But maybe my japanese domestic 2006 is different.
How about wires black/white and greens ?

hey bro..where you from??

Japan?? Pity you..If I'm in your shoes, I'll be having a big headache reading the wire diagrams..

I'll see if I can get my friends scanner. Cause I don't know what plug you need. It woud be easier if you knew the name of the plug you needed.

There is no name/number on connectors.
They are black and grey connectors.
I found a black/white wire on the black connector and 2 green wires on the grey connector.
With you service manual, you will see what color they have.
I would like to find out their function.
Thank you.

Where or what do they plug into.

They ( these wires) are wires of connectors to plug into ECU

What you need to do is make a cheap drawing with paint and give me a better idea. Unles you tell my what you want i.e. IAT, MAP, or TPS to ECU.

I want to do wiring work (cut wire and connect it to other).
the goal is fool ECU, make it derestricted.
My bike is rerestricted at 94ps / 88Nm
Thanks

Hello! I'm 2006 CBR1000RR owner from Russia. My bike is also japanese domestic spec with 94ps and speed limited to 115mph. I did necessary work to convert my bike to US spec. All I need to do now is to remove speed limiter. I wrote to the author of original question, but he is not responding now.

Could anybody please share readable 2006 wiring diagram with me? 2004-2005 wiring diagram would be appreciated also.

Thanks in advance.