CBR1000PhoDragon
4/30/2007 6:45:21 PM
Ok I know you all hate these questions but I just need some quick advice. I tried lowering my 06 1000rr this past weekend and had a little trouble getting the bolts off of the existing link. I can get the bolt closest to the rear wheel off but i cannot for the life of me get the second bolt closer to the engine off. If anyone has done this successfully please help me out. Thanks everyon
tmj1000rr
4/30/2007 10:09:27 PM
You can't get them loose or you can't slide them out?? Which one? If you can't slide them out you have to get the back of the bike off the ground. Then lift up on the rear wheel and slide out. I did mine with no problem. When you put it back together do the rear one first.
CBR1000PhoDragon
4/30/2007 10:40:20 PM
I cant slide the bolt out. I got the first one out by the wheel and all pressure is off of the second one but cannot slide it out.
tmj1000rr
5/1/2007 12:48:29 PM
Put the nut back on it a little bit and give it a tap. It should just slide out.
GraveyLastGearMC
5/6/2007 11:16:58 AM
do you have any pics of it lowered...if so please pm me with them im looking to do my 07...and how many inches did you do front and back...thanks
tmj1000rr
5/6/2007 9:29:17 PM
Gravey I have a couple of pic's posted in the 1000rr section under FINALLY DONE
