Sargeant Shitbag
4/10/2007 7:36:45 PM
Will the pc3 for the 2006 cbr 1000 fit the 05 model and what is the differance???
Part #'s are diff. 06/07 125-411
04/05 121-411
doncollins
4/10/2007 8:02:05 PM
Will most likely be different plugs and such.
doncollins
4/10/2007 8:10:08 PM
The pins inside the plugs could be different... the brain is the same, so there has to be something different with the wiring. Could be length.
Sargeant Shitbag
4/10/2007 8:13:46 PM
Does anybody know for sure not guessing?
WolfPack
4/11/2007 9:54:38 PM
not sure about the PCIII, but as far as the bikes go the 06/07 was tweaked motorwise from the 04/05 with a higher redline, higher compression ratio among other things if i remeber right.....have you compared the other end of the PCIII harness to see if the injector plugs fit?
id sleep better knowing i had the correct part-number that went with my bike installed in it...
Sargeant Shitbag
4/11/2007 10:20:52 PM
I just found out from Dynojet rep that the pc3 for a 1000rr will fit any year both part numbers will work on either bike you just have to load a new map for the correct year bike bc the maps are slightly differant. He didnt see a prob if you didnt, just advised doing it.
Thank you for the help!
