position light??

I think its called the position light..... anyway its the light thats directly over the headlamps. what type and size bulbs are they??

I've always called it the front marker light... it's a 12V5W and it's a 194 bulb. I ordered the LED194W so it's not the yellowish look.

Yo Don, where'd ya get that light at? I found 'em on e-bay a while back but can't find 'em now. Sux for me to have the pretty blue HID's and the yeller position light.

This is the same guy I ordered from.

How is the install of the bulb. I have never even looked, probably easy, just thought I woudl ask though

Simple... two screws on the front then find something that you can hook in behind the plastic lens to remove it. Mine was a little difficult so I used a paper clip to hook in the screw holes and pull it out. The bulb is a simple plug in.

quote:

ORIGINAL: doncollins

Simple... two screws on the front then find something that you can hook in behind the plastic lens to remove it. Mine was a little difficult so I used a paper clip to hook in the screw holes and pull it out. The bulb is a simple plug in.

Thansk. I will have to give one a try.

What is the position light for? Or is it just a marker

quote:

ORIGINAL: highflyin128

What is the position light for? Or is it just a marker

It's actually more of a "sidemarker" type of light. If you have your lowbeam on only at night, and you look at the right side of the bike from a distance, you can not tell the headlight is on. But you can see the "position light" serving as a "sidemarker" type of light.

It's a 194 wedge-base bulb and you can get LED's for this light at http://www.superbrightleds.com. This is where I buy all my LED stuff from, and they're great.

i believe you can actually just remove the bulb socket from the back of the housing with 1/4 turn to the socket, rather than remove/damage the lens and mess up that foam gasket.  those bulbs tend to come in pairs - does anybody have a spare?