Problem with switch on gauges - where to find replacement?

Hi All -

I recently bought my '02 F4i, and its great!! But, I'm having a small issue:

One of the switches on the digital gauges isn't working, so I can't reset my odometer or set the clock. (of course, the one that switches between mi & km works just fine, that comes in handy almost... never).

Anyways, I checked it, and the switch is basically screwed - ~70ohms resistance when the terminals should be shorted. So, where the heck do I find a part like this? Any of you EE's or ME's or techs, please help!

Here's some pics:

are you looking for the switch or to replace the entire cluster? I found your cluster on bikebandit for $449.15... WTF. I'd be suggesting to look on ebay to find a used one. Here's the link to the part

http://houseofmotorcycles.bikebandit.com/partsbandit/oem_schematic_view~schem_dept_id~386225~section_dept_id~1~section_dept_name~OEM+%28Stock%29+Parts~dept_type_id~2~model_dept_year~2002~model_dept_mfr~Honda~model_dept_id~375134~model_dept_name~CBR600F4.asp

Too bad you don't know any navy ET's, you can find one that's been through 5m school (or is it 2m school, I forget) and have them look up the switch and reconnect it, assuming the board doesn't have too much damage. Try talking to a geek at radio shack.

I'm just looking for the small part SW2, not the whole cluster. Would much rather solder 4 terminals and pay $2, than $400....

This one looks damn close.

http://www.allelectronics.com/cgi-bin/category.cgi?category=700325&item=PB-126&type=store




5 day and a few hours but it’s only at $11 with shipping right now


http://cgi.ebay.com/ebaymotors/honda-cbr-600-f4i-gauge-cluster-speedo-speedometer_W0QQcmdZViewItemQQcategoryZ34284QQitemZ4586594747QQrdZ1