[ View Full Version Of This Page ]

rear sets?

All Forums » 1000 Modifications » rear sets?

jg
12/13/2005 10:33:42 PM
Has anyone tried "rear sets" on their bike with any problem? I mean is it just a ground clearance thing or is the sit and control situation better?
clemson725
12/13/2005 10:36:06 PM
I'm not trying to tell you what you need, but in my opinion if you're not dragging knees or scraping pegs, you dont NEED rear sets. They will just make it more uncomfortable to ride around on. If you just want to do it to pimp your ride, go right ahead. They're expen$ive though.
jg
12/13/2005 11:02:16 PM
I was checking out the price and oh baby they are expensive. With that said I heard it gives more control. As far as clearance goes I have plenty for my kind of riding. I typically might do a few track days next year, and I might take Freddie Spencer's school in Vegas if I can come up with the money, but for the most part I enjoy doing about 2-300 miles a day cutting in and out of the mountain ranges we have near Portland Oregon. I heard that these rear sets give more control, but I never gave much thought to how uncomfortable they might be.

jg
clemson725
12/13/2005 11:32:00 PM
You may want some more opinions on them from people that have had them. i've never had any because i never had a reason to get them. I dont think the newer sportbikes are as likely to hit the pegs on the road like the older ones. The F2 i used to have had worn through the peg feelers and about 1/4inch into the peg itsself. I scraped some on the 900RR i have too. On the R1 i just bought, even though i took the feelers off, I've never been down low enough to scrap them. I've never heard the magazine editors complain about low pegs on any of the bikes they've test ridden lately. They may very well give you a sense of better control. That's something I wouldnt know since i've never ridden with them. They will jack your legs up high though like a jockey.
xrcrx
12/14/2005 12:01:22 AM
If you're pretty fast on track days, you'll get your stock pegs down. I have the Vortex rearsets and they're awesome! Look cool too. That said, IMHO if you're draggin' peg on the street you need to hit the track. If you're not draggin' pegs there's no need unless you just want the bling, though the fully adjustable pegs from Vortex, Harris ,and Gilles to name a few allow for down and forward movement of the pegs to a very small degree.
Anubis
12/14/2005 1:06:02 PM
I run with stock pegs, i`ve taken the stupid stalks off of course there redicoulous but i`ve found that my fairing touches down before the pegs do now. But i ride with my toes on the pegs some people prefer the centre of the foot on the peg if your one of these and you like track then you`ll need rearsets, you can also get jackup plates for the original rests.


Here ya go look at this pic and see where the pegs (well u can make out my toe) are in relation to the ground compared with the fairing>>>>





Thumbnail Image
Stonecold34gixxer
12/14/2005 4:22:24 PM
Adjustable rearsets can be made more OR less comfortable. You can raise them for track use or lower them for long commutes. Non-adjustables will usually raise and move your pegs back about a quarter inch. I have fully adjustable Yoshimura rearsets on my racebike and they work great, though I wouldn't want to ride across country with them adjusted as they are. Hope this helps.
L8X
12/14/2005 7:31:30 PM
wow, what aprt of your fairing touches the ground first?
Anubis
12/15/2005 5:55:04 AM
quote:

ORIGINAL: Stonecold34gixxer

Adjustable rearsets can be made more OR less comfortable.


Thats a good point i forgot about, i found my stockers comfy good for 400+ miles besides ya gotta stop every 100 miles or so for fuel so i have a little stretch and i`m good t go.

L8X the fairing just kisses down around the ridge in the middle of the fairing, only sometimes just reflecting on that i`ve never had the pegs touch. My toes yes pegs no.
MetalScorpio
12/15/2005 9:24:36 AM
the fairing will drag at the track if you are in a turn with eather a incline or if it has the safty markers. I have dragged my pegs and not the fairings on a flat track without the markers and when i replaced them for Harris rear-sets i then needed to adjust the shifter higher because it also dragged.



Notice the shifter dragged
jg
12/15/2005 9:49:36 AM
Thanks for the feedback. Cycle Cat makes a very nice adjustible rear sets. I have their bars and I love them.
Anubis
12/15/2005 12:28:38 PM
I was talking flat track Metalscorpio, what markers do you mean?
Tahoe SC
12/15/2005 4:50:34 PM
yo mang...your suspension set up all good or what?
if in a turn you're not compressing totally, it shouldn't hit...
suspension adjustments may just cure your touch down issues.
MetalScorpio
12/15/2005 11:44:26 PM

quote:

ORIGINAL: Anubis

I was talking flat track Metalscorpio, what markers do you mean?




red and white turn indicator and run offs. I have seen others do rub the plastics, but i do go that low by choice....i usually hide my knee also.
Anubis
12/16/2005 6:24:26 AM
The suspensions set up fine mate, its not a big issue it doesn`t happen all the time. And i also Read that one of the reasons the shape of the cowling has been changed on the 06 model is because of this `issue` with there race bikes.
Related Threads

[ View Full Version Of This Page ]

Return to the CBR Forum home page - Archive Home