iamwitit02
3/21/2007 9:16:52 PM
man o man can someone tell me how to change my plugs cause i know they need to be changed......do i have to take off the radiator or what if so then i got a good idea on what to do
rrasco
3/22/2007 12:20:04 AM
some people do that, however i dont have any problems getting my socket in there. just try putting the socket over the plug first, then attach it to the ratchet. use a small extension if you have one, works well.
gixxereater
3/22/2007 9:48:02 AM
+1
You can reach all of them from the side panels. The wrench from the tool kit actully works best. No need to take the radiator off although the center cylinders will likely teach you some new words. LOL
Stokersrule
3/22/2007 4:56:31 PM
Yeah. I used the tool kit also, although my stubby wrench set helped.
Detroit Cane
3/25/2007 8:10:45 PM
Best way to do it is to take off the bottom screws on the radiator and use a ratchetwith an extention
oldschoolCBR
3/26/2007 5:47:08 PM
Detroit Cane, that's what I did, and I used a long flat screwdriver, very lightly!, around the plug boots to lift them off the plug, after 17 years that shit was a little tight! I did the whole job in about an hour. And remember to put a little anti-sieze compound on the spark plug threads!
