[ View Full Version Of This Page ]

There is a screw in my tire!

All Forums » General Tech » There is a screw in my tire!

HkySk8r187
8/10/2006 2:49:44 PM
When I arrived at work today and got off my bike I realized there was a screw stuck in my rear tire about an 1.5 inches from the center. The screw punctured the tire because I took a look at it and can see it going into the tire and when I pressed hard on it I heard the slightest bit of air come out. The tire is a Dunlop Radial D207 I think...I beleive it's the stock 2004 Honda CBR600F4i rear tire.

Anyways, so my question is, should I imediatly ride the bike to a motorcycle repair place or is it good to drive it home and take it in tomorrow? Should I leave the bike where it is and take a cab home or what? Can I take it to a car tire repair place or motorcycle only? Any guidance is appriciated.
Reckles33
8/10/2006 2:59:26 PM
I would check the pressure and if it is good ride it to your local bike shop and get it replaced.
but ride slow.
HkySk8r187
8/10/2006 3:06:56 PM
Do I need to get a new tire or just have it patched? Can you patch a bike tire?
alvinho
8/10/2006 3:16:47 PM
This is controversial, but a lot of people would tell you to get a new tire. They say it is not safe to patch it.... I think it alls depends how fast and where you drive though. As I always drive on canyons, I just bought a new tire but if I was using my bike only for commuting I would had only patched it.....
I dont think a car tire place will patch a motorcycle tire.... In fact, at least in Los Angeles area is very hard to find a Bike place that would patch a motorcycle tire.......
Alvaro
HkySk8r187
8/10/2006 3:21:18 PM
Ok I'm just going to get a new tire. Can I just replace the rear or is it better to replace both at the same time? They told me on the phone that the replacement tire for me is the Dunlop Qualifier and they want $107 for it.
alvinho
8/10/2006 4:13:43 PM
Yes, you can replace just the rear tire.
Alvaro
spdrmns
8/10/2006 7:47:53 PM
depending on how far the shop is away from your place i would just take off the wheel and have them just do the tire and you would proly save a little money doing this as well..but if its really close just ride it there and dont take sharp turns!hahaha.
HkySk8r187
8/10/2006 7:50:36 PM
It was about 5 miles of freeway riding to the shop. I was at work when I noticed it and didn't have any tools so I just had a coworker follow me over there and I dropped the bike off. I'll be picking it back up in a bit. It was fine riding it over there althrough I was paranoid about it during the ride. It held pressure well so I figured I could make it the 5 mile trip.
HkySk8r187
8/10/2006 7:51:14 PM
Also, the guy said I was the 6th person to come in today with a screw in my tire. I think someone dropped a box of screws today or something haha.
12oclocker
8/10/2006 11:13:45 PM
track that guy down that dropped the screws, bring your cordless drill, and put 4 fresh screws in all of his tires.
Speaking of dropping crap, guess what was on the Highway today when I was coming into work, a brand new refrigerator, still in the box, sitting in the middle of the highway!! another good reason to pay attention to the road I guess
spdrmns
8/11/2006 4:53:13 AM
wow... that would take the top of my list of crap iv seen in the road...#2 on the list would be a mattress...lol..
johndoe
8/11/2006 11:10:22 AM
i've plugged lots of tires without any problems. $7 local auto parts store.
highmilage
8/11/2006 12:20:33 PM
running a plug in the rear tyre as we speak ( not actually right now as i sitting at the computer ya understand?)
rjmech
8/11/2006 4:23:03 PM
I have patched one when I was in a pinch but I got it replaced as soon as I could.
husker1600f4i
8/12/2006 12:10:33 PM
been running permanent plug for about 2000 miles no problems yet, but i have a qualifier hanging in garage just in case
doggy69
8/12/2006 1:31:03 PM
If the plug holds the air in..it woulda been fine unlees you are doing 150+ and knee dragging then i might ? the balance etc.
Related Threads

[ View Full Version Of This Page ]

Return to the CBR Forum home page - Archive Home