FLYNBYU
11/5/2005 4:20:35 PM
Do I need to look out for anything when replacing both throttle cables on the 03 600rr? How hard is it and what amount of time is required and any specific pointers? I have a shop manual, but I'm just looking for advice before taking the bike apart?
TIA
CMHGUY
11/5/2005 4:27:06 PM
Not sure, but let me know how it goes, I have an O3 too........ =o)
P.S. just remeber where all the screws go, I did a my exhaust.............O what fun that was remebering the screws...lol
Good Luck!
doncollins
11/5/2005 4:35:15 PM
I haven't had the pleasure of changing out the cable either. Good luck, let us know how it goes.
Fretless33
11/5/2005 5:50:19 PM
You have to disassemble the whole top of the motor
05Tribal
11/5/2005 7:40:36 PM
Great pic fretless but I would have said "you have to remove everything that is located on top of the motor." Before I saw your picture( I get all posts emailed to me first and they don't show the pics like the forum does) I thought the fix involved removing the head or "the whole top of the motor". LOL
Fretless33
11/6/2005 1:06:45 AM
quote:
ORIGINAL: 05Tribal
Great pic fretless but I would have said "you have to remove everything that is located on top of the motor." Before I saw your picture( I get all posts emailed to me first and they don't show the pics like the forum does) I thought the fix involved removing the head or "the whole top of the motor". LOL
LOL, That was my dry sarcasm that never comes across very well on these darn message boards
