Turn Signals

I bought aftermarket LED turn signal lights for my fornt and rear, now I have to install a turn flasher relay so my trun signals can blink. but I need to diable and locate the stock flasher relay. Can someone let me know where it is located. its a 2005 CBR 600 RR. thanks for the support.!!!!!

how come the stock flasher relay wont work?

just put LED signals on front and ca integrated on rear, and my stock flasher worked....just had to add the resistors on the taillight so it would flash

I put hot bodies LEDs on the front and clear alternative integrated on the back.... the flash rate was a flicker. They never fully went off. You had to really look to see that they were doing anything. The stock flasher is part of the speedo cluster so good luck trying to remove it. I had to add resistors to my front signals to obtain a fast flash again.

Had the same problem here some resistors should almost definately fix your problem

Yeah, but my rear signals stopped blinking when i installed my hotbodies flush mounts... will resistors fix that, too? If so, where the hell can i find them? This is bugging the crap out of me.

Resistors are what you need, work great.

resistors will fix the problem promise. it will make both the tail blink and front turn signals blink again normally

just remember that resistors don't go in series....you run across the two

I had the same problem. You can put the resistors up front with the front signals or in the back with the taillight. You shouldnt have to put them both front and rear. Good luck trying to find them. Ive gone to hardware stores and auto parts stores with no luck. Try a commerical electrical company or just catch an electrician making repairs in your area cause he might have some on him.

I have resistors that came with my integrated tail light and I will sell them for 1 milion dollars. not realy I think I saved mine and I'll send them to anyone who needs them. I'll look in my box but you can buy these at radio shck you just need to know how much resistance they need and you don't neccesarily have to use the white ceramic type that they send you if you can find one that looks different with the same resistance. bty I used no resistor and I hooked up leds on front back and I have blinkers under the pasenger pegs they are run in series and in paralel so they blink just right. cus I'm cool.

It never ceases to amaze me how cool you are....is there a book on how to be this cool?

-Adam

Yes and I have to say that I wrote it, it's not for sale in book stands but I can slide you a copy for half price. Let me know where to mail it. I can even autograph it if you want but the price will go up.

How much would it affect the price if you autographed every page? Not front and back, just every one. That way i can have your name on it each and every time i wipe my a*$.



lol -Adam