Undertail for 06 1000 RR - Page 2

Yeah I did the same thing I posted and then saw how old it was. Take some pics of your new tail. I want to see what you got and what it looks like. I Just bought a 1000 RR and am looking at tails. So please lets see it when you get it on.

I have an 06 myself and a Hotbodies exhust is the only way to go. It is the cleanest looking set up I have found. A little extra heat tape, slight modification to get it to fit, and she is nice and loud.

Do you have any pics of the hotbodies on your 06. If so let me see please.

^That one is sweeet, that is the one im going to get. Thanks for the pics.

What does the laser exhaust sound lik. If you can compare it to Arrow, Two Brother and Micron if you can. I also like the way the Laser looks and I am leaning towards it but I trying to do my home work before I run out and buy it.

Here a link to another thread on pipe sounds. Maybe you have seen already.
Unfortunatly, we do not know what bike the tests were run on, and most likley sounds a lot different than coming from computer speakers.  
Click Here 

Kodiak, a couple of questions for ya. I heard the lights that come with the comp. werkes FE are stick on with double stick tape. Is that true? Also, your tank protecter is that a clear one or silver? I see you kept the stock exhaust. Any concerns about adding a slip-on exhaust after you put on the FE and would it be better to do them both at the same time. Great pics, thank in advance.
 

quote:

ORIGINAL: CBR1000

Kodiak, a couple of questions for ya. I heard the lights that come with the comp. werkes FE are stick on with double stick tape. Is that true? Also, your tank protecter is that a clear one or silver? I see you kept the stock exhaust. Any concerns about adding a slip-on exhaust after you put on the FE and would it be better to do them both at the same time. Great pics, thank in advance.

 
The Tail lights come with double sided foam tape. The licence light comes with stronger double sided tape, its 3M VHB (Very High Bond) I use the same stuff at work. 
 
The tank protector is clear.  Here is link to the product. This is not where I got it from http://www.cyclestuffusa.com/index.asp?PageAction=VIEWPROD&ProdID=11325
 
I have no plans on replacing the stock can. (please no flaming) The Undertail / Fender Eliminator installs and removes very easily. So, if you get a new can later, it should not be a problem.   

i put a hotbodies slip on and undertail om my 05 1k

i put a hotbodies slip on and undertail on my 05 1k works and sounds great

Thanks Kodiak. I wish they didn't use tape. It doesn't seem right. I was considering staying with my stock can as well.

quote:

ORIGINAL: CBR1000

Thanks Kodiak. I wish they didn't use tape. It doesn't seem right. I was considering staying with my stock can as well.

 
The foam tape for the tail light is not applied, you have to put it on. But, you dont have to use it if you dont want.   I did not notice any other mounting holes for screw attachment on the lights. 

Admin, please delete.

I just ordered an undertail for my bike. It is a hotbodies one. but not the one with their exhaust.
 
I got this one. Just in red
 


Thumbnail Image

Looks really nice, do the kit came with a tag light?

The one I got does have both plate light and turnsignals.

Has anyone else gotten the fender eliminator kit from http://www.sprengineering.com/  i would like more feed back on installation

I forgot to mention it's for the cbr 1000 2006.  I'm so happy with this bike but the fender has to go.  I have the yellow and blue any other cosmetic mods. let me know.

JonnyJon,

Please post pics once you get it installed. I was considering the kit as well, but have concerns on what slip-on will work with it. Do you know if it will fit over the Arata T-Box?

I think they say which aftermarket pipes it goes well with on their site.  Also you can email them...yeah this might be the one for the money.  That competition werkes looks good though.

quote:

ORIGINAL: scottnh1970

JonnyJon,

Please post pics once you get it installed. I was considering the kit as well, but have concerns on what slip-on will work with it. Do you know if it will fit over the Arata T-Box?

 
I posted another thread with all my mods on it.

I have the fendereliminators.net one on my bike and i cant be happier with it. small, sleek and stylish with the turnsignals attached to the plate bracket and the bright tag light. i get some problems with the cops, but that will happen with almost anyone of these kits unless your plate is exactly perpindicular to the road

I bought the Competition Werks FE.  The install is very easy and it looks immaculate.  If you like I will send a picture or two.
 
 
Sprout

any pics of the mods you all have done...My stock 06 cbr 1000 needs some real help.  Also is it simple for a novice to install the fender eliminator...I was looking at it this weekend and really dont no where to start in cleaning up the factory fender