jasonb
10/13/2006 11:58:59 PM
Alrite now i need some help here.
Turn Signals Are not working.
I have read the manual many many times.
Says to connect the orange with the orange and the blue with the blue.
Did that and everything is connected.
But I am left with the Green wire on both Wires Which is ground.
I turned it on and nothing no turning or nothing. Please let me know if maybe.
I have to do something with the Green Wire I am clueless.
but the Brake Light freaking ROCK!ASSSS
sasakiman
10/14/2006 2:51:31 PM
If all of your turn signals aren't working get the wiring schematic, trace the wires and find the points that's common to all of the turn signals and check there for a disconnected plug(s) or broken wire(s) or blown fuse. If some of your turn signals work trace the wire to the non-working assemblies. If you're lucky it's only a disconnected plug.
jasonb
10/14/2006 8:34:18 PM
Fronts are working the only ones that aren't lighting up are the ones that are in the brake light.
The brake light works but the rear signals don't signal.
I grounded the green wire to the frame and still nothing.
Not sure what to do and have been wonderin for a long time.
jasonb
10/15/2006 4:45:24 PM
I got it it was the connectors they weren't on tight enough. Thanks though.
