What Front Signals On F4i?

I'm picking up an '02 F4i on Saturday and its still got the stock front signals. I want to change them out for some aftermarket, but I'm not sure what to get. I see that hotbodies has some now, but no pics on their site yet. My buddy just has some aluminum short stalks and they look good, but you can still see the rear mounting hole and I want to get some that completely cover the area. Well as long as their not the huge looking flushmounts. BTW if it matters the bike is red and black. If you have some on your bike please post some pics to help me out. Thanks alot

-Jesse-

i don't care for the look of most flushmounts either -- they look too 'aftermarket' if you will. i got a set that somewhat resemble the factory style, but are MUCH shorter and smaller, so I think they fit the style of the bike more and don't look like an afterthought. anyway, here they are, used with some Indy Spacers to cover the gap.

Thanks for the pics. Thats not really what I'm looking for, but it does look really good. Much smaller than the stock lights. I may just get some spacers and some short stalks for now, but I would like to see the hotbodies signals that they have for the F4i. I really like the look of greggs flushmounts, but for how much they are asking for them, they can keep 'em and I'm not even sure if they make them for the F4i. Thanks for the pics

-Jesse-

I'm looking for something like these-

I think that one is for the RR but I'm not sure.

-Jesse-

http://cgi.ebay.com/ebaymotors/Honda-CBR-600-F4i-600RR-1000RR-LED-EURO-TURN-SIGNALS_W0QQcmdZViewItemQQcategoryZ35580QQitemZ4605449326QQrdZ1

Heres the same ones that I posted above. The auction says that they are for the '01 and up F4i, but can anyone tell me if they will actually fit? Can anyone post a pic of them installed on their F4i? Thanks again

-Jesse-

quote:

ORIGINAL: Turnin20s

http://cgi.ebay.com/ebaymotors/Honda-CBR-600-F4i-600RR-1000RR-LED-EURO-TURN-SIGNALS_W0QQcmdZViewItemQQcategoryZ35580QQitemZ4605449326QQrdZ1

Heres the same ones that I posted above. The auction says that they are for the '01 and up F4i, but can anyone tell me if they will actually fit? Can anyone post a pic of them installed on their F4i? Thanks again

-Jesse-

i believe that the 01-04 f4i's are the same. could be wrong. i also found some other flushmounts that may be what you are looking for. they are made by greg's customs and seem to be pretty popular. click here

quote:

ORIGINAL: NINE2NINE

quote:

ORIGINAL: Turnin20s

http://cgi.ebay.com/ebaymotors/Honda-CBR-600-F4i-600RR-1000RR-LED-EURO-TURN-SIGNALS_W0QQcmdZViewItemQQcategoryZ35580QQitemZ4605449326QQrdZ1

Heres the same ones that I posted above. The auction says that they are for the '01 and up F4i, but can anyone tell me if they will actually fit? Can anyone post a pic of them installed on their F4i? Thanks again

-Jesse-

i believe that the 01-04 f4i's are the same. could be wrong. i also found some other flushmounts that may be what you are looking for. they are made by greg's customs and seem to be pretty popular. click here

I like those too, But I can't see spending that much for a couple of leds. I like the look of the hotbodies and will order them if I can figure out if they will fit or not. I'm almost 100% sure that they will, but I'll call them later this week to make sure. I'll let you guys know what I find out.

-Jesse-

Hi, I too own an '02 F4i and am looking for flush mounts. I found some on starcycle.com - these are the hotbodies ones and are much cheaper than my local shop. I think I'm going with those... hope this helps you out.

Stock.

i found some pretty sweet flushmounts for my '02 F4i and i think they're right up your alley. Alright, their MOTOBOSS, they are oval LED turn signals but they aren't flushmount....in the beginning. the blinker sticks out of the fairing and faces forward like any other cheesy blinker. But, if you take the screws out of the blinker case then you can easily see how small the circuitry is and it fits perfectly onto the stock F4i plastic. just tap holes straight into the plastic and use the screws that come with the blinkers. check out the pics if you still don't have a friggin clue what im talking bout. the best part.....they're $24.99


Thumbnail Image



Thumbnail Image

quote:

ORIGINAL: IrideHONDA

i found some pretty sweet flushmounts for my '02 F4i and i think they're right up your alley. Alright, their MOTOBOSS, they are oval LED turn signals but they aren't flushmount....in the beginning. the blinker sticks out of the fairing and faces forward like any other cheesy blinker. But, if you take the screws out of the blinker case then you can easily see how small the circuitry is and it fits perfectly onto the stock F4i plastic. just tap holes straight into the plastic and use the screws that come with the blinkers. check out the pics if you still don't have a friggin clue what im talking bout. the best part.....they're $24.99


Thumbnail Image



Thumbnail Image

Looks good, I'll check them out. Right now I have to get a new helmet and a new jacket before I get the signals. I'll probably have enough left over but will see. Thanks for all of the pics

-Jesse-

I've got arrowheads....by lockhart. They flow so nicely with the bike....