Whats involved in RR swingarm swap?

I noticed that there is a few RR swingarms on eby for decent proces, I am wondering what all I need to make the swap? Is it basically a bolt on or is the some modifications to be made?

Any info will be much appreciated.

Get ahold of Blue70, he just did his. Here is the tutorial from cbrworld.net

http://forums.cbrworld.net/forums/176286/ShowPost.aspx

i think he listed wat is needed....6rr swing arm, caliper & bracket, 1rr rear shock...and some other things i don't remember

I just started to type a tutorial last night .. The one on cbrworld is incorrect and incomplete but will give you the basic idea of what is involved.

xmunxjai648 is correct.

You will need

03-04 600RR Swingarm
03-04 600RR Caliper, bracket, and brake hose (From master cylinder to caliper, the F4i one is not long enough)
1000RR Rear Shock
6" long 3/8 grade 8 bolt with lock washer and nut
1 washer (about 20mm ID)
Some pipe with around 20mm ID (to sleeve the swingarm and caliper bracket..If not the caliper WILL move when you apply the brakes)

I will try to finish the tutorial tonight and get it posted for you

any update on the tutorial? also, what benefit would there be in doing this? it certainly LOOKS cooler...