wiring headlights

ok so i plan on getting some hid headlights and i also want to wire it up so both of my lights are on at the same time. I do not like the off centered cyclops thing that hond did. can anyone help me out i would really appreciate it.
 
thanx

can you not just leave the switch flipped? Its a lot easier that way. If you must wire let me know, but its A LOT easier to flip the switch.

+1 on flipping the switch

HEADLAMP WIRING GUIDE:

1. Locate high beam switch.
2. Locate finger on left hand. (index finger usually works best)
3. Place finger onto the front of the high beam switch.
4. Apply pressure to the front of the high beam switch.
5. High beam is now on.



Kidding of course. It's the way the headlamps work, and there's really no way around it (ESPECIALLY with an HID retrofit kit.) But I will say that HID's are probably one of the best upgrades you can do to a motorcycle. Not only for appearance purposes, but for you to see and be seen.

HID Wiring Writeup:

http://www.cbrforum.com/m_379249/tm.htm

So how annoyed is everybody around here when people constantly tell them that one of their headlights is out.....

And then when I demonstrate that it's the high beam, every single time like they're reading it off cue cards they go "I don't think that's legal"