F3 at low RPM

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

F3 at low RPM

Printable Version

CBR Forum >> Past CBR Models >> CBR 600F3 >> F3 at low RPM

Page: [1]

Message

<< Older Topic Newer Topic >>

F3 at low RPM - 9/25/2004 1:10:55 PM

b33r5

Posts: 5
Joined: 9/18/2004
Status: offline

Just curious if my thinking is in line here? At low RPM my bike seems "sluggish" for lack of a better word. When you get on it a little it has no ass. It's not a dog, but just seems low on power until you hit higher RPM. This is my first CBR so maybe everything is cool here and I have nothing to worry about? I was thinking maybe the carbs need adjusting. I was thinking about putting a jet kit in this winter anyway. Can someone tell me if this may be the problem?

Thanks in advance!!

Post #: 1

RE: F3 at low RPM - 10/19/2004 11:40:02 AM

shineynitelite

Posts: 24
Joined: 10/19/2004
Status: offline

this is normal the pistons are almost strait up and down what do you expect.. but i dont mean any disrespect sir... try pulling up a wheelie at 3grand compared to 7-8grand you will see what im talking about.. if you want to keep this bike out of the sluggish zone you just gotta keep the r's @ 5-6g at all times

_____________________________

(in reply to b33r5)

Post #: 2

RE: F3 at low RPM - 1/5/2005 3:20:31 PM

nivek4twty

Posts: 2
Joined: 1/5/2005
Status: offline

i have a 95 f3 and allthough i have it jetted to the max over size cam and hrc power comander, not to mention 4 up in the back and 2 down in the front, i have no problem lifting the bike at 3K. but a 600cc will allways feel slugish at low rpms. but it does sound like you need your carbs sinced. allso i had an older raged out track bike that seemed to slugish and i found out that rings were bad, and engine had bad compresion. but if torque is what you want sproket that little 600.

(in reply to shineynitelite)

Post #: 3

RE: F3 at low RPM - 3/26/2005 10:59:02 PM

transambird_2000

Posts: 329
Joined: 3/9/2005
Status: offline

hey least yours runs at lower rpms. Mine just up and dies if you try and lug it. it's a 96 with a pipe and filter and jet kit. It did it too me right after i bought it used so i took it to honda to clean the carb and they put the jet kit in it because it hadn't been added yet. Yeah it still does it. The machanic told me that it's normal for them to do that and to run it up above 6,000 rpm all the time. does that sound right to anybody. It never died since i been doing this but i am getting ready to stick my girlfriend on it to ride and now it kinda worries me.

(in reply to b33r5)

Post #: 4

RE: F3 at low RPM - 3/27/2005 1:55:12 AM

c11x

Posts: 25
Joined: 2/9/2005
Status: offline

my 600 run fine at low rpms, normal sluggish tho but thats normal.. also i have full exhaust/jetted

but cruisin around 2-4 grand runs great it shouldnt die at low rpms

(in reply to transambird_2000)

Post #: 5