micron high mount

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

micron high mount

Printable Version

CBR Forum >> Past CBR Models >> CBR 600F4 >> micron high mount

Page: [1]

Message

<< Older Topic Newer Topic >>

micron high mount - 6/17/2006 11:51:24 PM

crossfader13

Posts: 6
Joined: 6/13/2006
Status: offline

here's the question, i have a 99 f4 with plans to do the f4i tail swap and i was wondering if a micron high mount would fit my bike. it seems as if they dont make one for the f4's just the f4i. if this will work someone please let me know. and attatch photo's if you have them.

thanks
Derek

Post #: 1

RE: micron high mount - 6/18/2006 8:35:06 AM

adamwade

Posts: 71
Joined: 4/28/2005
From: Raleigh, NC
Status: offline

You can mount any exhaust for an F4i on an F4, but you have to put an F4i header on also. The F4 header comes underneath the bike at a different pitch and angle and will cause the F4i exhaust to sit at a bad angle. You should be able to pick up a header for an F4i on Ebay.

_____________________________

LIFE IS SHORT...STAY AWAKE FOR IT!!!!

'99 CBR600 F4

(in reply to crossfader13)

Post #: 2