Suspension settings

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

Suspension settings

Printable Version

CBR >> Past CBR Models >> CBR 954RR >> Suspension settings

Page: [1]

Message

<< Older Topic Newer Topic >>

Suspension settings - 6/21/2006 7:23:30 AM

ninjaboy

Posts: 10
Joined: 5/13/2005
Status: offline

Long time no post - How u peeps doin?
Been gettin plenty of air time on one wheel - lovin it!

Hoping to get lots of responses for this - what is your suspension setting?

Had my mechanic change the suspension to race standard; ie, almost maxed out rear compression but less for rebound damping - fronts are stiffened in both compression and damping - i think 1 full turn away from max. And I weigh 60kg.
Also the seat height has been raised so its a heck of lot taller...feet just touches the ground, but now the bike is soooooo stable, and anchors to the ground during fast corners and off camber turns, as well as over crest turns.
Down side: small bumps kicks your dearly beloveds into the valley between seat & tank, crushing your very future offspring...

So whats your suspension settings?

Has anyone had forks replaced or worked on? Oil changed? Valves redone? etc???

< Message edited by ninjaboy -- 6/21/2006 7:26:26 AM >

_____________________________