Would someone do me a favor please?? (2006 1krr manual required)

Printable Version

CBR Forums >> Current Honda CBR Models >> CBR 1000RR >> Would someone do me a favor please?? (2006 1krr manual required)

Page: [1]

Login Message << Older Topic   Newer Topic >>

Would someone do me a favor please?? (2006 1krr manual ... - 6/23/2006 6:22:33 PM    SirJAG   Posts: 176 Joined: 6/1/2006 Status: offline would someone please post what the stock suspension settings are for a 06 1k straight from the manual please. i need a base line cuz i messed mine all up and i dont have my manual with me.... thanks guys, james EDIT: is 38mm and 25mm for back correct?? < Message edited by SirJAG -- 6/23/2006 6:24:05 PM > Post #: 1

RE: Would someone do me a favor please?? (2006 1krr man... - 6/23/2006 7:23:34 PM    redloop   Posts: 43 Joined: 6/15/2006 Status: offline FRONT preload 7 turns clockwise rebound damping 2 1/4 turns counterclock wise comp. damping 1 3/4 turns counterclock wise REAR preload position 4 rebound damping 2 1/4 turns counterclock wise comp. damping 17 clicks counterclock wise (in reply to SirJAG) Post #: 2

RE: Would someone do me a favor please?? (2006 1krr man... - 6/23/2006 7:44:31 PM    1BADCBR1K Posts: 108 Joined: 3/21/2006 Status: offline Well, the manual doesn't have anything in mm, but here is what it reads: "To adjust standard position (front pre-load): 1. Turn the pre-load adjuster counterclockwise until it will no longer turn. This is the full soft setting. 2. Turn the adjuster clockwise 7 turns. This is the standard position. 3. Make sure both fork legs are adjusted to the same position." "To adjust the standard position (front rebound damping): 1. Turn the rebound damping adjuster clockwise until it will no longer turn. This is the full hard setting. 2. Turn the adjuster counterclockwise 2 1/4 turns. This is the standard position. 3. Make sure both fork legs are adjusted to the same position." "To adjust standard position (compression damping)" 1. Turn the damping adjuster clockwise until it will no longer turn. This is the full hard setting. 2. Turn the adjuster counterclockwise approximately 1 3/4 turns so that the punch mark on the adjuster aligns with the reference punch mark. This is the standard position. 3. Make sure both fork legs are adjusted to the same position." "To adjust spring pre-load: Positions 1 to 3: for a light load and smooth road conditions Position 4: standard position Positions 5 to 10: for when the motorcycle is more heavily loaded (also increase spring pre-load for stiffer suspension)" "To adjust standard position (rear suspension damping) 1. Turn the damping adjuster clockwise until it will no longer turn. This is the full hard setting. 2. Turn the adjuster counterclockwise approximately 2 1/4 turns so that the punch mark on the adjuster aligns with the reference punch mark. This is the standard position. "To adjust standard position (rear compression damping) 1. Turn the damping adjuster clockwise until it will no longer turn. This is the full hard setting. 2. Turn the adjuster counterclockwise 17 clicks so that the punch mark on the adjuster aligns with the reference punch mark. This is the standard position." Hope this helps... _____________________________ 2006 Candy Blue/ Yellow CBR1000RR Magical Racing windscreen Fender eliminator by Bikelitez.com Watsen Design flushmounts (in reply to SirJAG) Post #: 3

RE: Would someone do me a favor please?? (2006 1krr man... - 6/23/2006 8:53:30 PM    SirJAG   Posts: 176 Joined: 6/1/2006 Status: offline THANK YOU VERY MUCH GUYS, YOUR THE BEST. I KNEW I COULD COUNT ON THIS FORUM TO GET ME BY. THANKS AGAIN, JAMES (in reply to 1BADCBR1K) Post #: 4

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Top 10 Posters
voodoochyl 7459 doncollins 6282 tahoe sc 5915 rrasco 5747 tk954rr 5366 pitsvtec 5323 thex 5301 d2vw14_20 5166 vp 4940 chainstretch 4835

New Vendors
AMSOIL - Performance Oil Technology
AMSOIL - Performance Oil Technology