Mototek undertail install instructions???

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

Mototek undertail install instructions???

Printable Version

CBR Forums >> General >> General Tech >> Mototek undertail install instructions???

Page: [1]

Message

<< Older Topic Newer Topic >>

Mototek undertail install instructions??? - 6/25/2006 11:52:23 PM

Praetor

Posts: 10
Joined: 5/5/2006
Status: offline

They didn't send em with the piece, and i cant find em online. Anyone got a clue? i have no idea what im supposed to cut and where... any and all info appreciated!

Post #: 1

RE: Mototek undertail install instructions??? - 6/26/2006 1:30:25 AM

929 FRB18

Posts: 92
Joined: 5/11/2006
Status: offline

i put a powerbronze undertail on my bike just yesterday. i used a jig saw and cut the entire floor of the stock undertray out, leaving only the side rails. this is needed as towards the top of the tail, ie, tail light, there are bolts which hold the undertray to the frame. be sure not to cut to much material away, take time and be precise with measurements, its alot harder to put plastic back on then it is to cut it off. make sure you retain the factory battery tray.

good luck, its really not that hard when you get down to it.

(in reply to Praetor)

Post #: 2

RE: Mototek undertail install instructions??? - 6/29/2006 3:42:19 PM

Bunz15

Posts: 34
Joined: 1/23/2006
Status: offline

Have fun with that brother. I installed one of those on my bike a couple months back and the instructions didnt help for jack. Basically you have to cut off any part of the old fender that would be seen if you can imagine the new one there. I basically did a guess and check with the trimming. The fun part is when you get to the wiring. There is a whole lot of splitting going on. Im not really sure how i even got them working. But anyways, good luck.

_____________________________

Bunz15

(in reply to 929 FRB18)

Post #: 3

RE: Mototek undertail install instructions??? - 8/6/2006 8:21:57 PM

hondaman4life

Posts: 10
Joined: 8/6/2006
Status: offline

tryhttp://www.58cycle.com/images/parts/undertails/58cycle_gp_underta... hope this helps. still a pain in the ass but at least you'll have instructions &pics. mine exotic sportbike brand same asmototek &no instructions either.

(in reply to Bunz15)

Post #: 4

RE: Mototek undertail install instructions??? - 8/7/2006 12:16:02 AM

biggggant

Posts: 109
Joined: 11/21/2005
From: JaX, FL
Status: offline

that link seems bad but here is the link to mototeck's site www.mototeck.com just pull up you bike and and the undertail than just click the link for installation

_____________________________

DK Smoke ZG DB, PG Carbon Look Tank Pad, Hotbodies Flushmounts with diode mod, OES Accessories Sliders Mototeck Undertail, Targa Seat Cowl Gear:A* TZ-1, Shoei X-11 Kiyonari, JR Phoenix 2.0 Gloves, A* Vector backpack MSF GRAD

(in reply to hondaman4life)

Post #: 5

RE: Mototek undertail install instructions??? - 8/8/2006 12:07:00 AM

hondaman4life

Posts: 10
Joined: 8/6/2006
Status: offline

sorry about the bad link above . this is it here.http://www.58cycle.com/images/parts/undertails/58cycle_gp_undertail_install_inst.htm

(in reply to biggggant)

Post #: 6