CBR Forum   Classifieds   News   Photo Gallery   Search   Member List   Timeslips   Contact   Sponsors   Register   Login  

Just flipped the bike :-(... link to pix now added

  Printable Version
CBR Forum >> Current Honda CBR Models >> CBR 600F4i >> Just flipped the bike :-(... link to pix now added Page: [1] 2 3 4 5   next >   >>
Login
Message << Older Topic   Newer Topic >>
Just flipped the bike :-(... link to pix now added - 7/6/2006 7:03:17 PM   
06CBRF4i

 

Posts: 222
Joined: 6/19/2006
Status: offline
Well, Im fine a big scrape on my knee ripped my jeans. some slight burns on my arms from the mesh inside my textile jacket and not a scratch on my helmet somehow?!?! I am not sure WTF happened. I accelerated somewhat hard,, went to shift into second around 10-11k for some reason wouldnt go into 2nd only Neutral so I think I down shifted back to first still at 10-11K i assume and I think I just let the clutch out to fast and next thing I know, Over she went!! I was on a back road so there were no other cars around but the bikes not too bad i guess, i dont know how much bike parts cost but I called the dealer i bought it from and they came and picked it and me up. and tomorrow they are gonna do an estimate. $100 for the full estimate and $50 for picking it up!!! WTF!!!

Well heres a list of what I know its need.

Windscreen
Headlights
the intake plastics
front fender
mirrors
digi speedo & tach
banana seat plastics
back left turn signal
shifter assembly ( the left rear set snapped)
and possibly the left handle bar assembly.
The mufflers scratched and bracket is bent but im not too worried about that.

Im sure theres some kind of hidden damage to the front fork or something I dont know about, that they will try to stick me with.

Does anyone know where I can get any of these parts?!?! oh yea and its a 2006 CBR F4i Candy Blue.

Also I think im screwed b/c i dont think my insurance will cover this?!?! I have liability only thru Foremost or gulf coast insurance something like that. it was like $400 for the yr. what do yall think is there a possiblity?!?! I called already to ask but they were closed already or on vacation or something. I will have to try back tomorrow.

I have a few pix. I will try to upload and post them.

I just want to go get drunk and sit in a corner.............



Click to see pix, I think this one will work?!?!

there are also a few more links on the 2nd page of this post

< Message edited by 06CBRF4i -- 7/15/2006 11:59:49 PM >
Post #: 1
RE: Just flipped the bike :-(...... - 7/6/2006 7:16:06 PM   
PitbullF4i


Posts: 282
Joined: 6/25/2006
Status: offline
PitbullF4i's photo gallery
woo sorry to hear that, i feel your pain, well not really but i can only imagine..least your ok...you could try like shark skins for body parts ..if u dont want factory stuff

_____________________________


2002 CBR 954RR
WoodCraft clip ons
Pro-tek Rear Sets
Micron SERPENT superlight pipework with ULTRALIGHT titanium oval race system

(in reply to 06CBRF4i)
Post #: 2
RE: Just flipped the bike :-(...... - 7/6/2006 7:22:24 PM   
06CBRF4i

 

Posts: 222
Joined: 6/19/2006
Status: offline
I cant figure out how to post pix can someone help me figure it out?!?! I try to upload but it keeps saying file is too large. I cant resize it any smaller u wont be able to see it.!! Thanks for the help on this part...

(in reply to PitbullF4i)
Post #: 3
RE: Just flipped the bike :-(...... - 7/6/2006 7:23:45 PM   
PitbullF4i


Posts: 282
Joined: 6/25/2006
Status: offline
PitbullF4i's photo gallery
make sure its saved as a jpeg

_____________________________


2002 CBR 954RR
WoodCraft clip ons
Pro-tek Rear Sets
Micron SERPENT superlight pipework with ULTRALIGHT titanium oval race system

(in reply to 06CBRF4i)
Post #: 4
RE: Just flipped the bike :-(...... - 7/6/2006 8:48:25 PM   
OldFatGuy



Posts: 1642
Joined: 12/15/2005
From: Missouri, good ol' USA
Status: offline
OldFatGuy's photo gallery

quote:

ORIGINAL: 06CBRF4i

I cant figure out how to post pix can someone help me figure it out?!?! I try to upload but it keeps saying file is too large. I cant resize it any smaller u wont be able to see it.!! Thanks for the help on this part...


The dimension size isn't too large, the quality is too high. Save it with lower quality/number of pixels. Making the dimensions smaller will only help some. Try saving somewhere around 300 X 200 with a lower level of quality to get the filesize down.

Hope this helps.

_____________________________

'06 1000RR Red/Black

'04 1800 Goldwing Candy Black Cherry
'05 Shadow VLX Deluxe Pearl White (Wife's)

Ride Safe, Ride Often, Ride Far

(in reply to 06CBRF4i)
Post #: 5
RE: Just flipped the bike :-(...... - 7/6/2006 9:31:44 PM   
biggggant



Posts: 109
Joined: 11/21/2005
From: JaX, FL
Status: offline
biggggant's photo gallery
good to hear you're in good shape bro you can fix our baby. I'm almost done getting my parts from flipping my. I needed a windscreen, upper, headlight, tank, tail, rear seat, mirrors, left switch pod and upper bracket I think I'll be spend around 1k. I coulda spent more if I just hurried up but I coulda paid less with a little more paitence. But I figure two months is long enough lol. Just keep your eye out on the forums or at the least get your parts onine like 58cycle.com or ronayers.com good luck bro

_____________________________

DK Smoke ZG DB, PG Carbon Look Tank Pad, Hotbodies Flushmounts with diode mod, OES Accessories Sliders Mototeck Undertail, Targa Seat Cowl Gear:A* TZ-1, Shoei X-11 Kiyonari, JR Phoenix 2.0 Gloves, A* Vector backpack MSF GRAD

(in reply to OldFatGuy)
Post #: 6
RE: Just flipped the bike :-(...... - 7/6/2006 10:30:38 PM   
FastCRX


Posts: 298
Joined: 6/23/2006
Status: offline
dude i feel so bad for you. money is replaceable but your life isnt glad to see you made it ok.

< Message edited by FastCRX -- 7/6/2006 10:33:13 PM >

(in reply to biggggant)
Post #: 7
RE: Just flipped the bike :-(...... - 7/6/2006 10:32:29 PM   
mikem317


Posts: 382
Joined: 5/15/2005
Status: offline
Ouch.

Don't downshift when you're in that engine speed, you're asking for it!

I buy all my OEM accessories/parts through www.bikebandit.com.

_____________________________

Regards,
Mike

quote:

"Baseball is ninety percent mental. The other half is physical." -- Yogi 'Bird-Brained' Berra

(in reply to FastCRX)
Post #: 8
RE: Just flipped the bike :-(...... - 7/6/2006 10:50:57 PM   
alekinci



Posts: 1317
Joined: 4/20/2006
Status: offline
Man you should have looked at the previouis posts about shifting. Bad times right there for 06CBRF4i. Screw the bike; the main thing is you can walk away from this incident without the need for assistance.
I had to beat this into my head and still do. When something goes wrong, never react right away. Your first instinct is usually too drastic and equals hitting the floor. Give you self room and with enough room you will have time to make the right decision. Dont react on impulse, I know its hard. I fight it every time Im on the road, but resist it. Be safe.

< Message edited by alekinci -- 7/6/2006 10:52:59 PM >

(in reply to mikem317)
Post #: 9
RE: Just flipped the bike :-(...... - 7/6/2006 11:12:14 PM   
bikesnjeeps


Posts: 91
Joined: 7/10/2005
Status: offline
bikesnjeeps's photo gallery
can we say eBay!!! I am going through the same thing right now. Glad to hear you are alright. Machinery can be fixed some body parts don't do that too well. I am loving e-bay right now. Got some good stuff cheap. Also I don't think that your ins will cover being only liability. If you had comp it would be different. Perfect time to trick out your bike though. put on that sick undertail that you didn't want to cut the stock undertray for, get the custom smoked double bubble windscreen, yadda yadda.

(in reply to alekinci)
Post #: 10
RE: Just flipped the bike :-(...... - 7/6/2006 11:47:38 PM   
greerstyl

 

Posts: 109
Joined: 9/27/2005
Status: offline
greerstyl's photo gallery
ok 1st of all. do not buy your parts from the dealer. you will get raped on the price. there going to tell you somewhere around $2000 from the description you told us. ebay will help you find all the parts at decent prices, way better than the dealers. i would suggest looking in the classified sections of this site. and post on the wanted forum in classifieds. you will save alot of money this way. i actually have some of the shit you need. but go get your bike as soon as possible. you are already $150 in the hole.

2nd bikesandjeeps has a really good point. aftermarket stuff is always cheaper, way cheaper, and now seems to be the time to do it. buy some cool shit and come back stronger. oh yeah and like i tell everyone. buy a cage. you would have saved so much money

(in reply to bikesnjeeps)
Post #: 11
RE: Just flipped the bike :-(...... - 7/6/2006 11:50:18 PM   
greerstyl

 

Posts: 109
Joined: 9/27/2005
Status: offline
greerstyl's photo gallery
btw i have the headlights, turn signals, stock exhaust, gauges, and windscreen. i also have the subframe if you need it.


(in reply to greerstyl)
Post #: 12
RE: Just flipped the bike :-(...... - 7/7/2006 5:04:23 AM   
Spike


Posts: 106
Joined: 6/2/2006
Status: offline
"the bikes not that bad I guess"

You guess? Not that bad? Dude you basically broke everything but the engine, frame and swingarm, I wouldn't consider that "not that bad". Sorry to hear about what happened dude but, what were you thinking? How long have you been riding? Is this your first bike?? You said dealer so I'm assuming it's an 06'??

_____________________________

Never argue with an idiot, they just drag you down to their level then beat you with experience.

(in reply to greerstyl)
Post #: 13
RE: Just flipped the bike :-(...... - 7/7/2006 10:54:08 AM   
06CBRF4i

 

Posts: 222
Joined: 6/19/2006
Status: offline
the frame and swing arm didnt break. At least not that I could tell. mainly seemed like all plastic parts except the muffler was slightly dented and scratched and that mounting tab was bent. Im not touching that it can stay that way, just bend it back out. I'lll end up getting a slip on eventually. the side ferrings engine cases/stator cover or whatever werent even touched no scratches it end up on its side in the grass and did most of the falling in the grass. I guess i was too close to the curb which could be a good thing I guess.? Well i should hear back from the deal today sometime with their quote to fix it all. But I think I might just have them replace the digi speedo & tach whatever might be wrong with the handle left bar and the left rear set/ gear lever. then bring it home let it sit and replace the rest little by little on my own.

I have found a few OEM parts suppliers online. However they dont state anything about colors?? Do the stock replacement parts just come black and have to be painted and decaled or can you get the stock replacement parts already the color you need them??

Thanks for the help.

(in reply to Spike)
Post #: 14
RE: Just flipped the bike :-(...... - 7/7/2006 11:08:08 AM   
mikem317


Posts: 382
Joined: 5/15/2005
Status: offline
First bike?

_____________________________

Regards,
Mike

quote:

"Baseball is ninety percent mental. The other half is physical." -- Yogi 'Bird-Brained' Berra

(in reply to 06CBRF4i)
Post #: 15
Login OR Register now to post a reply to this forum topic.
Page:   [1] 2 3 4 5   next >   >>

 
CBR >> Current Honda CBR Models >> CBR 600F4i
Jump to:

Featured Sponsors
Advertising Info

Top 10 Posters
voodoochyl6552
doncollins6230
tahoe sc5842
pitsvtec5318
rrasco5129
d2dgraphix_64877
blue fox4473
vpsophmore4390
chainstretch4152
havoc4144

New Vendors
AMSOIL - Performance Oil Technology
AMSOIL - Performance Oil Technology

CBR Forum .com is not affiliated with or endorsed by Honda Motor Company.