12 o clock (Full Version)

CBR >> Racing and Recreational >> Stunters Corner

12 o clock

  

Gadget -> 12 o clock (7/12/2006 12:17:26 PM)

Hey everyone just got a quick question .
Im planning on faricating my own 12 o clock bar and i was wondering if anyone new the exact angle the scrape part should be set at ?? i know there has to be a specific angle to put it at so it will hold the bike . im not worred about getting the mounting points right now i just be sure i can find out exactly how to have it sit first . Once i find all of my info i will then begin to make it .Thanks in advaned .

  
seldon929rr -> RE: 12 o clock (7/12/2006 12:52:45 PM)

try welding a round bar on there first, hit 12 and scrape it then you got your angle take it off and weld on the flat plate

Scott982 -> RE: 12 o clock (7/12/2006 8:14:38 PM)

just buy on there not very expensive and will fit your bike perfect

stuntn_r6 -> RE: 12 o clock (7/13/2006 4:33:16 PM)

im still not sure about the idea of a round bar...seems like when you came back to hit it, it would throw the bike one way or the other...

Scott982 -> RE: 12 o clock (7/14/2006 1:12:45 AM)

My round bar feels fine it has never thrown me to the side or anything..I like it cause I won't destroy my tail when I scrape and i didn't want to cut up my tail for a bg ass 12 bar..

Soarer -> RE: 12 o clock (7/15/2006 2:33:31 AM)

My buddy welded up a 12 bar for my other buddy's buell xb12r. It came out ok but it wasn't totally level. It cost $35 in materials and took him 4 hours to get in sort of right. Lesson = buy one. It'll be perfect the 1st time.

  

Page: [1]

Return to CBR Forum home page or view the Full Version of this page.