*Updated with new Pics* Fender/Rear Signal saturday project

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

Updated with new Pics Fender/Rear Signal saturday project

Printable Version

CBR >> Current Honda CBR Models >> 600 Modifications >> *Updated with new Pics* Fender/Rear Signal saturday project

Page: [1]

Message

<< Older Topic Newer Topic >>

*Updated with new Pics* Fender/Rear Signal saturday pro... - 7/19/2006 2:15:49 AM

tmut121

Posts: 25
Joined: 5/26/2006
Status: offline

So I had some free time and I decided to try a DIY project last Saturday. I saw somewhere in one of the forums a link to this DIY rear signal relocation to the side reflector holders. Thought it might be interesting so I tried it. I also partly removed the bottom half of the fender. I used the stock location of the rear signals and modded a couple L brackets to hold the license plate in place of that location. Sorry, I didn't take a picture of it as I was in a hurry to leave out of town. I'll put some up shortly of the plate bolted on too. I haven't yet decided if I want the plate there for good. I may remove the whole plastic fender when I get a new exhaust and relocate the plate underneath the battery holder at an angle. I also need to wire in a plate light. It's a start to my DIY project, what do you guys think...?

Pics with License Plate bolted on.

< Message edited by tmut121 -- 7/28/2006 4:06:55 AM >

_____________________________

06 CBR 600RR - Silver (purely stock!)
NorCal

Post #: 1

RE: Fender/Rear Signal saturday project - 7/19/2006 4:19:41 AM

Ssaba420

Posts: 152
Joined: 2/6/2006
Status: offline

Nicely Done ~ All About Custom Work Right There !! GJ

(in reply to tmut121)

Post #: 2

RE: Fender/Rear Signal saturday project - 7/19/2006 1:24:34 PM

tmut121

Posts: 25
Joined: 5/26/2006
Status: offline

thanks. i wanted to spend some time with my bike and get to know it. what better way than to break out the service manual and open her up myself. it was fun to do and now I think i will get fram sliders and put them on myself also....

quote:

ORIGINAL: Ssaba420

Nicely Done ~ All About Custom Work Right There !! GJ

_____________________________

06 CBR 600RR - Silver (purely stock!)
NorCal

(in reply to Ssaba420)

Post #: 3

RE: Fender/Rear Signal saturday project - 7/28/2006 4:08:36 AM

tmut121

Posts: 25
Joined: 5/26/2006
Status: offline

Updated pics with the License Plate bolted on with customed "L" brackets.

< Message edited by tmut121 -- 7/28/2006 4:10:44 AM >

_____________________________

06 CBR 600RR - Silver (purely stock!)
NorCal

(in reply to tmut121)

Post #: 4

RE: Fender/Rear Signal saturday project - 8/14/2006 6:53:20 PM

Doodie

Posts: 41
Joined: 8/14/2006
Status: offline

That's some nice work but I have to say that the intergrated tail is always the way to go.... You can get them on Ebay in many different colors. Mine is smoked....

< Message edited by Doodie -- 8/14/2006 6:54:20 PM >

(in reply to tmut121)

Post #: 5

RE: Fender/Rear Signal saturday project - 8/16/2006 10:50:47 PM

tmut121

Posts: 25
Joined: 5/26/2006
Status: offline

that does look clean.

it's just a preference to me. the signals are a lot easier to see in than the intergrated, in my opinion. i just want to be safe and seen on the streets.

_____________________________

06 CBR 600RR - Silver (purely stock!)
NorCal

(in reply to Doodie)

Post #: 6