Aftermaker rear/front signal question....

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

Aftermaker rear/front signal question....

Printable Version

CBR >> Current Honda CBR Models >> 600 Modifications >> Aftermaker rear/front signal question....

Page: [1]

Message

<< Older Topic Newer Topic >>

Aftermaker rear/front signal question.... - 7/21/2006 9:17:19 PM

tmut121

Posts: 25
Joined: 5/26/2006
Status: offline

after customizing the rear fender and relocating my rear signals, when i stand back and look at them...i feel i need to get some smaller rear signals. i find a variety of looks and sizes all over the net. the question; do i cut off the factory wires from the stalk of the oem signals, or do aftermarket signals have wire harnesses that plug and play? i heard stories about the lights not flashing properly with flush mounts. is it the same case with these too?
for example these kind of rear/front signals/ short stalkers

< Message edited by tmut121 -- 7/22/2006 2:13:50 AM >

_____________________________

06 CBR 600RR - Silver (purely stock!)
NorCal

Post #: 1

RE: Aftermaker rear/front signal question.... - 7/22/2006 2:45:48 AM

dragonium25

Posts: 1109
Joined: 4/12/2006
Status: offline

You gotta cut and splice. Do a search and you'll find tons of stuff on wiring and the fast-flash problem.

_____________________________

"To defeat the dragon within, you must defeat the dragon without"

'05 600RR Black/Tribal
Framesliders
Scorpio i500 alarm
Puig DB smoke
CA tail light
8000K HIDs
Custom FE & Meshing
Watsen Design LEDs
2Bros M2 slip-on
PCIIIUSB

(in reply to tmut121)

Post #: 2

RE: Aftermaker rear/front signal question.... - 7/25/2006 7:37:42 PM

drag the knee

Posts: 254
Joined: 1/12/2006
Status: offline

when i got my fender eliminator from www.fendereliminators.net i got this model.

and when i did the front two signals (same lights as on the license plate) they gave me 1 resistor for each side. after you've spliced the two wires you connect these, (the resistors are the things on the bottom of the pic)

to the wires, one end of the neg, one on the positive wire and wah la.

_____________________________

Vortex 520 conversion -1 Front sprocket +2 rear Galfer steel braided brake lines Shogun Frame Sliders Jardine slip on hotbodies race fairings

(in reply to dragonium25)

Post #: 3

RE: Aftermaker rear/front signal question.... - 7/26/2006 6:50:20 PM

tmut121

Posts: 25
Joined: 5/26/2006
Status: offline

Cool thanks for the input.

quote:

ORIGINAL: drag the knee

when i got my fender eliminator from www.fendereliminators.net i got this model.

and when i did the front two signals (same lights as on the license plate) they gave me 1 resistor for each side. after you've spliced the two wires you connect these, (the resistors are the things on the bottom of the pic)

to the wires, one end of the neg, one on the positive wire and wah la.