CBR Forum   Classifieds   News   Photo Gallery   Search   Member List   Timeslips   Contact   Sponsors   Register   Login  

"Ticking" noise above 4000 revs

  Printable Version
CBR Forums >> Current Honda CBR Models >> CBR 600F4i >> "Ticking" noise above 4000 revs Page: [1] 2   next >   >>
Login
Message << Older Topic   Newer Topic >>
"Ticking" noise above 4000 revs - 8/3/2006 10:53:53 AM   
lebeaudj

 

Posts: 3
Joined: 8/3/2006
Status: offline
Hi all,

New to the forum, so howdy to all.

Took the bike out for a run the other night and noticed a strange "ticking" noise when I open up the throttle. I've checked oil, all well there, chain tension is fine as well (thought it could be the chain knocking).
Are there any common causes for this, noise seems to be coming from top end of engine and only rears it's head when I start to open her up... Around town low rev's seems fine.

I'll be looking at her a little closer later when I finish work, but thought I would post a quick one to check if it's something common.

Thanks in advance for any help.

Dan
UK
Post #: 1
RE: "Ticking" noise above 4000 revs - 8/3/2006 12:56:26 PM   
snowboarding82


Posts: 1488
Joined: 6/25/2006
Status: offline
snowboarding82's photo gallery
I get the same thing too my bike is brand new I guess it's our CCT thingymabober. Everyone says it's not a problem from what I hear just annoying.

Mike

(in reply to lebeaudj)
Post #: 2
RE: "Ticking" noise above 4000 revs - 8/3/2006 1:29:49 PM   
Tahoe SC



Posts: 5874
Joined: 8/24/2005
Status: offline
Tahoe SC's photo gallery
well...ticking could also be a slight exhaust leak or valve tap...

_____________________________

Admit it...you love my siggy...

"Let the ignorance die with the ignorant" - Tahoe SC
bye bye F4i!

(in reply to snowboarding82)
Post #: 3
RE: "Ticking" noise above 4000 revs - 8/3/2006 2:21:45 PM   
snowboarding82


Posts: 1488
Joined: 6/25/2006
Status: offline
snowboarding82's photo gallery
Hmmmmm so do you think I should take it in? I wonder if the warrenty covers that?

Mike

(in reply to Tahoe SC)
Post #: 4
RE: "Ticking" noise above 4000 revs - 8/3/2006 2:56:42 PM   
Blackdog F4i


Posts: 874
Joined: 7/27/2006
Status: offline
Probably CCT. Yes, warranty covers it although if they replace it with a stock one, expect it to be back in 3-4K.

If it's under warranty have the dealer check it.

_____________________________

John
CBR 600 F4i
Built it Frame-up.
Mods: Scorpion Carbon High Mount, PCIII, Supersport Undertail, CA Integrated LED Taillight, Targa Cowl, LP Short Stalks, Pyramid Hugger, Shogun Frame and Bar sliders, Corbin Saddle.

(in reply to snowboarding82)
Post #: 5
RE: "Ticking" noise above 4000 revs - 8/3/2006 3:01:39 PM   
jjkukla


Posts: 587
Joined: 7/14/2005
Status: offline
jjkukla's photo gallery
quote:

ORIGINAL: Tahoe SC
well...ticking could also be a slight exhaust leak or valve tap...


Certainly a possibility.

Depending on the mileage of your bike, I'd put my money on the CCT being the problem. I noticed the same thing on my bike after 5k miles and it only makes noise from 4.8k-5.2k rpms.

Use the search feature to find more threads on the CCT/engine rattle issue. LOTS OF READING HERE ABOUT THAT.


_____________________________

'03 F4i, Yosh Ti TRS, PC III, Galfer brakes, K&N, flush mnts, LSL sliders, fender elim, hugger, xenon lts; Electro-pod, Tapeworks and mesh kits

(in reply to Tahoe SC)
Post #: 6
RE: "Ticking" noise above 4000 revs - 8/3/2006 3:05:18 PM   
snowboarding82


Posts: 1488
Joined: 6/25/2006
Status: offline
snowboarding82's photo gallery
I only have 1500 miles and its done it from day one. It's done the ticking above 4k rpms AND the metal sheering noise from 6-6300.

Mike

(in reply to jjkukla)
Post #: 7
RE: "Ticking" noise above 4000 revs - 8/3/2006 7:09:32 PM   
lebeaudj

 

Posts: 3
Joined: 8/3/2006
Status: offline
Hmm, mine only started recently and I think from memory mines at about 6k mileage... Not at home so cant check for sure atm...

It does sound from reading the other threads that this could well be the CCT.. (I did do a search, just didnt hit quite the right phrase..)
I am guessing that the Honda CCT is hydraulic like most others (dependant on oil pressure...)?

Anyway, suggestions on decent after-market replacement CCT's would be appreciated, definately want rid of this noise!

Regs,

Dan

(in reply to snowboarding82)
Post #: 8
RE: "Ticking" noise above 4000 revs - 8/4/2006 1:26:59 AM   
BillytheKid

 

Posts: 191
Joined: 4/13/2006
Status: offline
BillytheKid's photo gallery
Ape manual cam chain tenioner.

Had really bad rattle at 5K... now its completelty gone. I had got so used to the noise that nowadays i still wonder when i dont hear it.

(in reply to lebeaudj)
Post #: 9
RE: "Ticking" noise above 4000 revs - 8/4/2006 3:31:30 AM   
shraz


Posts: 684
Joined: 11/12/2005
From: CA
Status: offline
shraz's photo gallery
Honda makes crap CCT just get used to the rattling sound

(in reply to BillytheKid)
Post #: 10
RE: "Ticking" noise above 4000 revs - 8/4/2006 4:19:19 AM   
NicIsSlick


Posts: 155
Joined: 8/2/2006
Status: offline
Its the CCT they go like crazy i just replaced mine

(in reply to shraz)
Post #: 11
RE: "Ticking" noise above 4000 revs - 8/4/2006 5:01:14 AM   
xtremehakeem

 

Posts: 58
Joined: 7/12/2006
Status: offline
Hey u need one of these:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=120013762446&ih=002&sspagename=STRK%3AMEWA%3AIT
and do this:
http://www.bossturbo.com/cbr/howto_cct.shtml
and check ou this also:
http://cbrworld.net/forums/thread/85183.aspx

and you won't have to deal with it again

(in reply to NicIsSlick)
Post #: 12
RE: "Ticking" noise above 4000 revs - 8/4/2006 4:22:57 PM   
lebeaudj

 

Posts: 3
Joined: 8/3/2006
Status: offline
Hey all,

Thanks for all the replies, got myself a new CCT on order now and hope to fit it over the weekend (should arrive tomorrow).

Regs,

Dan (UK)

(in reply to xtremehakeem)
Post #: 13
RE: "Ticking" noise above 4000 revs - 8/7/2006 11:37:57 AM   
gt2nv


Posts: 397
Joined: 7/12/2006
Status: offline
gt2nv's photo gallery

quote:

ORIGINAL: snowboarding82

I get the same thing too my bike is brand new I guess it's our CCT thingymabober. Everyone says it's not a problem from what I hear just annoying.

Mike


same here, i took my 06 back to the dealer and they said that it was normal

(in reply to snowboarding82)
Post #: 14
RE: "Ticking" noise above 4000 revs - 8/7/2006 11:49:36 PM   
NoTime

 

Posts: 45
Joined: 5/27/2006
Status: offline
I've got a ticking sound that I just recently discovered for the first time driving a block without my helmet on. I couldn't ever it in the past with the helmet on. It's very clear from low to mid rpms while it's in gear and is related to rotation as it clicks faster with rpm. It reminds me an old fashioned speedo or tach cable spinning around and hitting on something. Anyone familiar with this? The bike has 14k miles so I suppose it's time for a CCT anyway.

(in reply to gt2nv)
Post #: 15
Login OR Register now to post a reply to this forum topic.
Page:   [1] 2   next >   >>

 
CBR Forums >> Current Honda CBR Models >> CBR 600F4i
Jump to:

Featured Sponsors
Advertising Info

Top 10 Posters
voodoochyl7099
doncollins6247
tahoe sc5874
rrasco5558
pitsvtec5323
d2vw14_205043
tk954rr4665
vpsophmore4663
blue fox4570
havoc4492

New Vendors
AMSOIL - Performance Oil Technology
AMSOIL - Performance Oil Technology

CBR Forum .com is not affiliated with or endorsed by Honda Motor Company.