600 RR Tail on 600 F3 ADVICE ANYONE

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

600 RR Tail on 600 F3 ADVICE ANYONE

Printable Version

CBR Forums >> Past CBR Models >> 600 Modifications >> 600 RR Tail on 600 F3 ADVICE ANYONE

Page: [1]

Message

<< Older Topic Newer Topic >>

600 RR Tail on 600 F3 ADVICE ANYONE - 8/30/2006 8:56:40 AM

VALKYIE

Posts: 237
Joined: 4/29/2006
Status: offline

I am here in korea working for the government and I am going home on vacation in a few days. I plan to play around with 600RR tail that I got from ebay and I hope that the seat arrives while I am home. Has anyone completed this mod? I hope someone can point me in the right direction. I pretty much have an idea on how to mount it. I am going to keep it simple as possilbe and if I figure out how to mount it and keep it pretty than I will share all.

Post #: 1

RE: 600 RR Tail on 600 F3 ADVICE ANYONE - 8/31/2006 8:11:03 PM

TwistedCBR

Posts: 487
Joined: 3/23/2006
From: carmel valley, ca
Status: offline

Email me gotskyline@tmail.com

I'll email pics, won't be good but they might help. Got the rr tail on the f3

But only use the cut f3 seat

(in reply to VALKYIE)

Post #: 2

RE: 600 RR Tail on 600 F3 ADVICE ANYONE - 10/10/2006 11:59:01 PM

Dark Light

Posts: 23
Joined: 6/22/2006
Status: offline

quote:

ORIGINAL: TwistedCBR

Email me gotskyline@tmail.com

I'll email pics, won't be good but they might help. Got the rr tail on the f3

But only use the cut f3 seat

hey, if u can please email me some of theose pics, this sounds like it would look pretty good. Thanks

CKY1652@aol.com

(in reply to TwistedCBR)

Post #: 3

RE: 600 RR Tail on 600 F3 ADVICE ANYONE - 11/7/2006 6:47:57 PM

mrjasey

Posts: 33
Joined: 10/3/2006
Status: offline

make a how to!

i was thinking about doing this mod sometime as well.

_____________________________

2005 honda cbr 600 rr
1990 mazda miata

(in reply to VALKYIE)

Post #: 4

RE: 600 RR Tail on 600 F3 ADVICE ANYONE - 11/8/2006 12:07:07 PM

kulrevon

Posts: 52
Joined: 12/6/2005
Status: offline

I put a f4i tail on my f2.

I needed to cut and bend the end of the subframe up. You will probably need to do the same for the 600rr.
also you will need to make bracketry to mount the seats. the seats will usually hold the plastic pretty well.

_____________________________

91 cbr600 f4i fairings headlight tail seats undertail. gsxr rears. RK 520chain vortex -1+2. D&D carbon exhaust. Soon to be high mount. F4i gauges w/gsxr speedo sensor. K&N Filter. Jet kit?

(in reply to mrjasey)

Post #: 5

RE: 600 RR Tail on 600 F3 ADVICE ANYONE - 11/8/2006 3:38:33 PM

rrasco

Posts: 5140
Joined: 3/6/2006
From: San Antonio, TX
Status: offline

when doing my F1 to RR tail swap, I tried to use a rear fender from an F3 and it doesnt fit right. The 2 upright screw mounts get in the way. You could cut them, or I dont know if an F4 fender will fit on the F3 subframe, but it does on the F1. And thats what is usually used with the RR tail swap. I'm sure there are several ways to do it, depending on your creativity.

_____________________________

http://www.snackbar-games.com - Your Games, Your Site, Your Community
-You dumb bastard, its not a schooner, its a sailboat!
CBR Forum Buddy: txn_driver

(in reply to kulrevon)

Post #: 6