Two Bros Exhaust for CBR 1000 RR
Login  | |
|
Two Bros Exhaust for CBR 1000 RR - 9/9/2006 1:41:20 AM
|
|
|
godzilla
Posts: 4
Joined: 8/19/2006
Status: offline
|
I am trying to install a slip-on Two Bros exhaust on my 2005 CBR1000RR. Does any one know what to do with the power valve and the cables attached to the stock exhaust? The instructions call for "disconnecting the cables from thr power valve on the right and removing from the servo on the left". Your help will be greatly appreciated.
|
|
|
|
|
|
|
RE: Two Bros Exhaust for CBR 1000 RR - 9/9/2006 8:28:24 AM
|
|
|
baxsom
Posts: 1348
Joined: 6/28/2006
Status: offline
|
take the cables off of the servo
the valve is inside the exhaust it goes with the pipe
you can take the cables off of it or leave them
both items are going away anyway
leave the servo attached and plugged in
since yours is an 05 the servo is on the engine
go to this site
http://hooliganbiketech.dynup.net/hondacbr1000rrweb/1000RR_frameindex.htm
and look for the heading on the left labeled
Exhaust Gas Control Valve
< Message edited by baxsom -- 9/9/2006 8:32:59 AM >
_____________________________
street-2006 1KRR,
track-07 600RR
yes, i guess maybe i can be a jerk, but i am tired of reading the same questions and hearing the same would be experts give out wrong info.
|
|
|
|
|
RE: Two Bros Exhaust for CBR 1000 RR - 9/9/2006 11:30:09 AM
|
|
|
godzilla
Posts: 4
Joined: 8/19/2006
Status: offline
|
Thank you so much, baxsom. This was very helpful.
|
|
|
|
|
RE: Two Bros Exhaust for CBR 1000 RR - 9/9/2006 11:42:07 AM
|
|
|
baxsom
Posts: 1348
Joined: 6/28/2006
Status: offline
|
not a problem
_____________________________
street-2006 1KRR,
track-07 600RR
yes, i guess maybe i can be a jerk, but i am tired of reading the same questions and hearing the same would be experts give out wrong info.
|
|
|
|
|
RE: Two Bros Exhaust for CBR 1000 RR - 9/24/2006 7:34:26 PM
|
|
|
kream 1000
Posts: 2
Joined: 9/24/2006
Status: offline
|
I want to buy a full exshast for my o6' cbr 1000 should I get a yosh, or two brother's?
|
|
|
|
|
RE: Two Bros Exhaust for CBR 1000 RR - 9/24/2006 9:35:00 PM
|
|
|
baxsom
Posts: 1348
Joined: 6/28/2006
Status: offline
|
most dynos have shown that the yosh full system doesnt offer as much hp as a quality slip on
for example on 1000rr.net you will find charts that show a yosh full giving 5hp
the arata slip on gives more than that without a PC
go with anything else
_____________________________
street-2006 1KRR,
track-07 600RR
yes, i guess maybe i can be a jerk, but i am tired of reading the same questions and hearing the same would be experts give out wrong info.
|
|
|
|
|
RE: Two Bros Exhaust for CBR 1000 RR - 9/26/2006 12:36:00 PM
|
|
|
IronViper
Posts: 17
Joined: 9/24/2006
Status: offline
|
Hey anybody actually running Two Brothers exhaust and have feed back on it?
Thanks,
|
|
|
|
|
RE: Two Bros Exhaust for CBR 1000 RR - 10/6/2006 4:34:14 AM
|
|
|
deek98
Posts: 81
Joined: 9/29/2006
Status: offline
|
I have a 2005 CBR1000RR, Repsol ed.
Which happens to have a Two Brothers slip on exhaust on it.
What do you want me to take a pic of?
steve
|
|
|
|
|
RE: Two Bros Exhaust for CBR 1000 RR - 10/6/2006 4:35:28 AM
|
|
|
deek98
Posts: 81
Joined: 9/29/2006
Status: offline
|
I have a two brothers slip on. But those yosh are sweet lookin.
steve
|
|
|
|
|
RE: Two Bros Exhaust for CBR 1000 RR - 10/6/2006 2:57:31 PM
|
|
|
svtcobras
Posts: 33
Joined: 8/23/2006
Status: offline
|
Maybe a dumb question, what function does that servo perform?
_____________________________
06' CBR-1000RR (NESBA #913)
77' RD-400D
05' VTX-600
|
|
|
|
|
RE: Two Bros Exhaust for CBR 1000 RR - 10/6/2006 3:58:34 PM
|
|
|
IronViper
Posts: 17
Joined: 9/24/2006
Status: offline
|
I would like to know about fit, tail section modification was it needed? sound are there two different baffles (race & street). Is it oval like yosh or a can like traditional older bikes exhaust and does it stick way out of the tail section? I 've also read sometimes you have to remove the stock heat shield to get them to fit! I guess your right pics are the best to answer most questions.
Let me explain I do mostly track days but some street riding. I 'm currently riding street to get first 600 miles to due service before first track day. I have an 06 CBR1000RR and looking for exhaust and I ahd a CBR929RR prior and had a 2 Brothers on it and I liked the sound.
|
|
|
|
|
RE: Two Bros Exhaust for CBR 1000 RR - 10/27/2006 6:51:04 PM
|
|
|
Certified Ryder
Posts: 70
Joined: 10/9/2006
Status: offline
|
Iron,
as you can see I run the two brothers, i Love it, my entire MC club is jealous. As far as the fit initially i left the heat shield on but took it off for a cleaner look. As far as the fit everything went back on fine. It was pretty painless to install.
Thumbnail Image
 Attachment (1)
_____________________________
06 CBR 1000RR
Second Look seat covers and tank protector,Two Brothers CF Slip-on exhaust, Clear Alternatives Tail Integrator, Euro Style Flush Mounts, Dyno Jet PCIII, Competition Werkes Fender Eliminator
PCIIISUB
Before you ryde......Get Certified
|
|
|
|
|
Printable Version
