Flapper Mod
Login  | |
|
Flapper Mod - 9/21/2006 5:11:18 PM
|
|
|
mtm
Posts: 16
Joined: 7/12/2006
Status: offline
|
I have a 2004 1000rr , did the flapper mod yesterday . I am not planning any other mods until winter, due to funds will this mod be alright by itself?
|
|
|
|
|
|
|
RE: Flapper Mod - 9/21/2006 5:22:31 PM
|
|
|
FATHEADS1KRR
Posts: 424
Joined: 9/8/2006
From: St.Louis
Status: offline
|
Was the first mod i did and didn't have any neg affects. Would think you'll be fine considering its really there mostly for noise anyway.
_____________________________
06, rs5 yosh, 15/42, speedohealer, flapper, mototeck flush mounts, motovation no-cuts. Puig /blk
|
|
|
|
|
RE: Flapper Mod - 9/21/2006 6:26:27 PM
|
|
|
mtm
Posts: 16
Joined: 7/12/2006
Status: offline
|
Thanks for the input . By the way how do you like the Yosh.
|
|
|
|
|
RE: Flapper Mod - 9/22/2006 12:46:43 PM
|
|
|
FATHEADS1KRR
Posts: 424
Joined: 9/8/2006
From: St.Louis
Status: offline
|
I'm diggin it !! Have heard some good/bad about it, but for what i paid for it, (240) i'd say bang for the buck wise, its the poo. Fit nice, and had some pretty good instuction w/it, which some of the others don't have. Nice lookin can too, i think. I'm sure there is better out there, but i have gotten some compliments on it at bike nights. Was lookin at the arata too, but its more than twice the price of the yosh. Maybe when i toast it i'll upgrade !!
_____________________________
06, rs5 yosh, 15/42, speedohealer, flapper, mototeck flush mounts, motovation no-cuts. Puig /blk
|
|
|
|
|
RE: Flapper Mod - 9/22/2006 2:19:39 PM
|
|
|
mtm
Posts: 16
Joined: 7/12/2006
Status: offline
|
I'm trying to decide between the Yosh or the Jardine RT-One dual outlet carbon fiber slip-on.
|
|
|
|
|
RE: Flapper Mod - 9/22/2006 6:54:43 PM
|
|
|
baxsom
Posts: 1348
Joined: 6/28/2006
Status: offline
|
if those are your only two options go with the jardine
yosh just isnt the pipe for these bike
5hp increase is the norm
_____________________________
street-2006 1KRR,
track-07 600RR
yes, i guess maybe i can be a jerk, but i am tired of reading the same questions and hearing the same would be experts give out wrong info.
|
|
|
|
|
RE: Flapper Mod - 9/22/2006 9:34:38 PM
|
|
|
blade17fire
Posts: 353
Joined: 4/19/2006
Status: offline
|
yup..yosh won't give u the amount of power like akra, sato and arata will give..If you've got the cash get either 1 of these pipes.. I've gain only 4 hp with PC III using a yosh slip-on..you do the mathematics...
Remove the flapper..cut the fins in the air duct..remove the PAIR valve..remove the exhaust catalyser..remove the exhaust valve(if you got the slip-on)..PC III..BMC air filter and u will be surprise at the power gained without installing the full system..
_____________________________
GPR Thunderline Exhaust
BMC air filter
Hodaka V stacks
Flapper mod
PC III
AFAM Sprockets
HID Headlights
HRC Clutch Springs
HRC Cam Sprockets
HRC Engine Power Up Kit III
HRC 1/6 Turn Throttle
Ported and Polished Cylinder Head
|
|
|
|
|
RE: Flapper Mod - 9/23/2006 11:58:16 AM
|
|
|
FATHEADS1KRR
Posts: 424
Joined: 9/8/2006
From: St.Louis
Status: offline
|
Wasn't sayin its the best "i'm sure there is better" but from a bang for the buck standpoint, its a good choice, i think. For what i paid for it, i have done all the other mods listed, and a fe kit, and nice no-cut frame slides on the way, and STILL have $$ left compaired to buying a arata/sato. Like e/thing else in life it has its good and bad points. If hp was my main concern, i wouldn't have purchased the honda either !!
_____________________________
06, rs5 yosh, 15/42, speedohealer, flapper, mototeck flush mounts, motovation no-cuts. Puig /blk
|
|
|
|
|
RE: Flapper Mod - 9/23/2006 2:21:04 PM
|
|
|
mtm
Posts: 16
Joined: 7/12/2006
Status: offline
|
What type of no cut frame sliders are you going to use?
|
|
|
|
|
RE: Flapper Mod - 9/23/2006 8:08:53 PM
|
|
|
baxsom
Posts: 1348
Joined: 6/28/2006
Status: offline
|
take a stock exhaust, punch out the baffles,
do the flapper mod and get a good tune with a PC3 and it will equal that of a yosh pipe and then the only exhaust you had to pay for is the 1" drill bit and extension used to punch the stock
i punched out my exhaust and it sounded at least as good as every yosh i have heard
the bike doesnt need a pipe to begin with but if you are going to get one
get one that works
dont settle on substandard parts just so you can say i have a pipe
_____________________________
street-2006 1KRR,
track-07 600RR
yes, i guess maybe i can be a jerk, but i am tired of reading the same questions and hearing the same would be experts give out wrong info.
|
|
|
|
|
RE: Flapper Mod - 9/25/2006 1:16:48 PM
|
|
|
FATHEADS1KRR
Posts: 424
Joined: 9/8/2006
From: St.Louis
Status: offline
|
Ordered the motovation sliders. Was gonna go w/the shoguns till i read about em bending into the engine, even at low/no speed. E/one is out of stock of em right now, but sposed to have more by the mid of this week.
_____________________________
06, rs5 yosh, 15/42, speedohealer, flapper, mototeck flush mounts, motovation no-cuts. Puig /blk
|
|
|
|
|
Printable Version
