Yoshimura RS-5 Install (Full Version)

CBR Forums >> Current Honda CBR Models >> CBR 600RR

Yoshimura RS-5 Install

  

josho66 -> Yoshimura RS-5 Install (8/3/2005 8:12:23 AM)

I just ordered this slip on for my 2005 600RR and I was thinking about installing it myself. I was wondering how hard of an install it is. Also does it come with install instructions or are there some posted online somewhere?? I have some mechanical knowledge but not much, especially on a motorcycle. Is this something that most people can do or am I better off having it done by my local shop?? For those that have a shop do it how long did it take and how much did they charge?? Any help would be great!!

  
TxAg98 -> RE: Yoshimura RS-5 Install (8/3/2005 8:26:30 AM)

From what Ive heard, the hardest part is getting all the body work and crap off. Slip on install should just be disconnecting at midpipe and putting new one on. I imagine you could handle it with limited knowledge.

RiPTOR -> RE: Yoshimura RS-5 Install (8/3/2005 9:27:29 AM)

I installed a Jardine RT-One on my bike. Whole process took me maybe 2 hours from taking everyhting apart, removing the old system, installing new system, patching it back up. Instructions can be helpful but honestly aren't necessary. If something's in the way, remove it [;)]
Make sure you remove the heat shields off of the 'S' pipe from the stock system, you'll wanna put those on the new system.

05Tribal -> RE: Yoshimura RS-5 Install (8/3/2005 9:32:52 AM)

Check out www.twobrothersracing.com. On there site you will find install instructions for their pipe on the CBR600RR. They are very well writen and show a lot of good picture and will be the same for any after market under seat pipe for your RR.

springs -> RE: Yoshimura RS-5 Install (8/3/2005 4:04:50 PM)

Do it yourself it will make you more familar with your bike,save some$$ and make you feel good about it.... I installed myn and it was really easy just take your time. Be carefull when taking of the old pipe as to not ruin the gasket. Had I thought about it I would of got a new one before hand (it dosen't come with a new one). One last thing remeber to loctite all the bolts when putting it backtogether.(use the Blue not the red loctite)Good luck.

josho66 -> RE: Yoshimura RS-5 Install (8/3/2005 4:37:03 PM)

Well my local shop said that is takes about 30-60 mins. to install and they said install is $25 to $50.......

dballer324 -> RE: Yoshimura RS-5 Install (8/3/2005 7:15:03 PM)

save yourself the money and do it, you'll get to learn more about your bike...plus its easy, don't be afraid to bend the tail plastic.

josho66 -> RE: Yoshimura RS-5 Install (8/3/2005 7:47:06 PM)

Do I keep the stock heat shield that is under the tail section?? I know that the stock one down on the side of the bike I keep, what about the one under the seat???

springs -> RE: Yoshimura RS-5 Install (8/3/2005 8:00:15 PM)

No you don't .. but they give you some heat shielding material to use.

josho66 -> RE: Yoshimura RS-5 Install (8/3/2005 9:42:41 PM)


quote:

ORIGINAL: springs

No you don't .. but they give you some heat shielding material to use.


Sounds good. How does the canister mount under the seat??

knife_edge -> RE: Yoshimura RS-5 Install (8/19/2005 8:40:57 PM)

I can't to receive my Slip-on tomorrow. Do you have pics of your bike?

wheelie_chris -> RE: Yoshimura RS-5 Install (11/19/2007 8:56:30 PM)

did anyone find instructions on how to install a yoshimura exhaust? because i just got a used Yoshimura rs-5 exhaust for a 2005 cbr 600rr.. can anyone help me or post instructions on how to do it..?

baxsom -> RE: Yoshimura RS-5 Install (11/20/2007 6:06:40 AM)

    its for an 07 but close enough that it should be able to get you going
http://www.600rr.net/vb/showthread.php?t=74778

  

Page: [1]

Return to CBR Forum home page or view the Full Version of this page.