No Cut Sliders for 2005 600RR????

Printable Version

CBR Forums >> Current Honda CBR Models >> CBR 600RR >> No Cut Sliders for 2005 600RR????

Page: [1]

Login Message << Older Topic   Newer Topic >>

No Cut Sliders for 2005 600RR???? - 8/4/2005 11:05:57 PM    RepSolRider Posts: 130 Joined: 7/26/2005 Status: offline Anybody heard of a no cut slider for a 05 600RR yet??? Is it even possible to make them? I'm not even positive where it would mount on the bike. I just bought one for my wife and havent even had a side fairing or inspection cover off of it yet. Thanks in advance for any help!!! _____________________________ RepSolRider 2005 CBR 1000RR Repsol Edition and 2005 CBR 600RR Tribal The motorcycle is God's way of weeding out the Gene Pool. The Literbike is God's way of determining whether the weeding worked." Post #: 1

RE: No Cut Sliders for 2005 600RR???? - 8/5/2005 9:33:37 PM    BlindLOKI Posts: 728 Joined: 1/22/2005 Status: offline There are some called Oggy Knobbs... which are kind of spendy. I beleive there might be a couple more out now too, from different companies. search for Oggy Knobbs in the forum and youll come up with my post on it. I just e-mailed them today to see what was with the price and to see if I could get them cheaper somewhere... take it easy, good luck, Chris (in reply to RepSolRider) Post #: 2

RE: No Cut Sliders for 2005 600RR???? - 8/6/2005 10:11:06 PM    bowtiepwr Posts: 62 Joined: 7/22/2005 Status: offline >check out Shogun no cuts @ http://www.kneedraggers.com/details/Shogun_Frame_Sliders_Honda_CBR600RR--59-SHOGUN-1.html _____________________________ 2004 CBR 1000RR K&N filters, sprockets -1/+2, SpeedoHealer, PCIII USB, awaiting Yoshimuria RS5. 1994 Z28 supercharged/N2O/bored and stroked www.camaroz28.com (in reply to BlindLOKI) Post #: 3

RE: No Cut Sliders for 2005 600RR???? - 8/6/2005 11:47:22 PM    05Tribal Posts: 919 Joined: 5/23/2005 Status: offline Looks like kneedraggers decided to stop falsely advertising that there are no "effective" a cut sliders for the 600RR. How could there could be since the plastics cover so much of the engine on the sides of the bike? Don't get me wrong I wish it were possible but I don't see how. In fact if someone has a pic please post it so I can be proven wrong cause I’d buy a set. _____________________________ 2006 Red & Black CBR1000RR Street Bike With a few mods 2007 White & Silver CBR600RR For the wife 2005 CBR600RR Totally for the track! Columbus, OH (in reply to bowtiepwr) Post #: 4

RE: No Cut Sliders for 2005 600RR???? - 8/7/2005 8:22:49 PM    BlindLOKI Posts: 728 Joined: 1/22/2005 Status: offline im with tribal...^^^^^ anyone have em on there bike? how hard was install? are they ACTUALLY no-cut? thanks for any help, Chris (in reply to 05Tribal) Post #: 5

RE: No Cut Sliders for 2005 600RR???? - 8/7/2005 10:07:51 PM    RepSolRider Posts: 130 Joined: 7/26/2005 Status: offline Has anyone looked at the Oggy Knobs websight http://www.kenma.com.au/public/oggy.html ??? I have been trying to contact them by phone any havent had any luck. I keep gettin g that number is no longer in service. I do get email responses from them about how to make payment and such but I am a little concerned about sending that much money to a company that doesent even have a working phone number. Anybody had any dealings with this company yet??? _____________________________ RepSolRider 2005 CBR 1000RR Repsol Edition and 2005 CBR 600RR Tribal The motorcycle is God's way of weeding out the Gene Pool. The Literbike is God's way of determining whether the weeding worked." (in reply to RepSolRider) Post #: 6

RE: No Cut Sliders for 2005 600RR???? - 8/15/2005 9:20:16 AM    Chips Ahoy   Posts: 4 Joined: 8/15/2005 Status: offline Oggy Knob does not have no-cut slider for the CBR600RR. The fine print next to the slider application chart says that a 50mm hole is required. (in reply to RepSolRider) Post #: 7

RE: No Cut Sliders for 2005 600RR???? - 8/15/2005 8:16:10 PM    RepSolRider Posts: 130 Joined: 7/26/2005 Status: offline I called their Tech directly and he swear up and down that these are a no modification install....i.e no holes to drill or cut.......I have never seen a set personally, all I know for sure is they are expensive as hell and come all the way from Sydney, Australia. Anybody with any more knowledge about these that can enlighten us a little more??? _____________________________ RepSolRider 2005 CBR 1000RR Repsol Edition and 2005 CBR 600RR Tribal The motorcycle is God's way of weeding out the Gene Pool. The Literbike is God's way of determining whether the weeding worked." (in reply to Chips Ahoy) Post #: 8

RE: No Cut Sliders for 2005 600RR???? - 8/15/2005 10:00:46 PM    05Tribal Posts: 919 Joined: 5/23/2005 Status: offline I've studied my 600rr and for the life of me can't figure out how anyone could fab no cut sliders that would not get in the way of the riders legs. Call back and see if they will email you a quick pic with them installed. I hope they are not blowing smoke simply because you live on the other side of the world. _____________________________ 2006 Red & Black CBR1000RR Street Bike With a few mods 2007 White & Silver CBR600RR For the wife 2005 CBR600RR Totally for the track! Columbus, OH (in reply to RepSolRider) Post #: 9

RE: No Cut Sliders for 2005 600RR???? - 8/15/2005 10:04:31 PM    Cooter Posts: 65 Joined: 4/21/2005 Status: offline even if the things are "no-cut", you don't want them. Anything that curves around the fairing that far isn't going to hold up in the event the bike actually DOES fall and the sliders have to do what they are designed to. I've talked to people that make them for a living, and if they don't connect directly to the motormounts and take a straight path from there, they won't have the strength to support 300+ pounds falling 4 feet at any speed. just take them to a mechanic and have them installed for $15 or so. < Message edited by Cooter -- 8/15/2005 10:05:37 PM > (in reply to RepSolRider) Post #: 10

RE: No Cut Sliders for 2005 600RR???? - 8/16/2005 11:41:55 PM    Minhtin   Posts: 86 Joined: 7/3/2005 Status: offline Yea, ican't see how those squirly brackets from oggy knobs gonna hold up when the bike fall. (in reply to Cooter) Post #: 11

RE: No Cut Sliders for 2005 600RR???? - 8/19/2005 8:31:15 PM    knife_edge   Posts: 50 Joined: 7/27/2005 Status: offline What shogun are those, I' d made holes for the shogun sliders I got and I got the latest ones. (in reply to bowtiepwr) Post #: 12

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Top 10 Posters
voodoochyl 7174 doncollins 6259 tahoe sc 5876 rrasco 5619 pitsvtec 5323 d2vw14_20 5101 tk954rr 4941 vpsophmore 4729 blue fox 4575 chainstretch 4572

New Vendors
AMSOIL - Performance Oil Technology
AMSOIL - Performance Oil Technology