03 600rr

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

03 600rr

Printable Version

CBR >> General >> General Tech >> 03 600rr

Page: [1]

Message

<< Older Topic Newer Topic >>

03 600rr - 11/20/2006 7:06:24 PM

zman

Posts: 4
Joined: 11/20/2006
Status: offline

Hey guys im new to the forum. I have a 03 600rr, and im also building a 03 600rr race bike and was curious as to whether a motor out of an 06 cbr600 will bolt in to the 03 frame. If so then are there any other complications i should be aware of? Thanks guys and gals.

Mike

Post #: 1

RE: 03 600rr - 11/20/2006 10:03:55 PM

Jason748

Posts: 416
Joined: 10/22/2006
Status: offline

Yes, it will bolt right in. But you will need the exhaust, airbox & ECM from the 06 motor as well, Other than that it's a straight bolt-in.

_____________________________

05 CBR600RR - RACE
98 Ducati 748S - Street & Track
60 Ducati 200SS - Fun
89 RM125 - Dirt

Thanks to my 2007 sponsors: Two Brothers Honda, Lithium Motorsports, LockhartPhillips TP, CBR600RR.com

(in reply to zman)

Post #: 2

RE: 03 600rr - 11/20/2006 10:36:35 PM

JBaz

Posts: 777
Joined: 1/30/2006
Status: offline

I actually am currently rebuilding my 04 600rr and swapped in an 05. There are subtle differences between the 03/04 to 05/06 models. For a complete motor swap, you'll need the complete engine, wiring harness and ECM. The airbox are the same, but the throttle body is different. I'm currently using the 03/04 throttle body on the 05/06 engine because the fuel rails aren't the same and won't hook correctly, but I'm mixing the fuel rail years. Also to note, I'm having a bitch of a time to complete the wiring harness on the 05 since its different and no one has the 05 shop manual. I'm missing the MAP sensor connector on the wiring harness, either that or the connectors and location is different. You have to use the 03/04 exhaust system since the 05/06 exhaust has an extra bend to clear the frame/rear swing arm as both are different.

Other then that, it's been a fun build. I'm hoping to finish the build in a month or so.

_____________________________

Proud owner of:
2004 Honda CBR600 RR

(in reply to Jason748)

Post #: 3

RE: 03 600rr - 11/21/2006 2:22:48 PM

zman

Posts: 4
Joined: 11/20/2006
Status: offline

awesome guys! I appreciate it much. The motor im looking at will be with ecu, airbox, throttle bodies........and harness all from an 06. This is gonna be a bitchin bike

(in reply to JBaz)

Post #: 4