ignition

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

ignition

Printable Version

CBR >> Past CBR Models >> CBR 600F3 >> ignition

Page: [1]

Message

<< Older Topic Newer Topic >>

ignition - 8/17/2005 4:24:25 PM

amey200

Posts: 17
Joined: 8/17/2005
Status: offline

Hi
someone missed up when my ignition lock and i cannot get my key in it. So what i did is I pulled out the three wires.
SO when i join the two red wires the bike comes alive. and I was wondering what the third wire is, which is blueish green in color,
should I join all the three wires with a tape or just the two , The bike works fine with only two.

Post #: 1

RE: ignition - 8/18/2005 9:35:00 AM

vincysurfer

Posts: 5
Joined: 8/7/2005
Status: offline

Lol, you couldn't possibly be asking how to run a stolen bike would you ? I hope not. If you look at the wiring diagram the blue wire is the one that runs to the fan/thermostat so it could be important. I guess see if your fan is cutting in without it. If not you are shortly going to overheat. I have never removed all three from the plug and run them individually so not 100% sure. The other two run the circuit to the starter motor, kill switch and starter button by the looks of it.

(in reply to amey200)

Post #: 2