calis evap control

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

calis evap control

Printable Version

CBR Forum >> Current Honda CBR Models >> 1000 Modifications >> calis evap control

Page: [1]

Message

<< Older Topic Newer Topic >>

calis evap control - 1/15/2007 4:03:03 PM

woody

Posts: 1
Joined: 1/15/2007
Status: offline

Can any one help and tell me how to remove the smog crap of a cali 1000rr 06 i think its the evap canister and solenoid but maybe someone has a link w/ directions thanks

screw hard ride hard

Post #: 1

RE: calis evap control - 1/15/2007 6:03:19 PM

abadfish

Posts: 771
Joined: 6/26/2005
Status: offline

IMHO, its not worth it unless you're doing track or racing. There won't be any hp gains and the weight savings is very minimal.

Now having said that....

I don't have a write-up but assuming its the same as a 600RR (highly likely), its quite simple. Do the following:
- remove the EVAP canister
- remove the solenoid
- plug all vacuum lines on the throttle bodies that connect to the solenoid (you can also simply plug the 5-way split that goes between the throttle bodies and the solenoid but you'll clean up the area when plugging at the throttle bodies because you'll remove all those hoses

You can also get rid of the PAIR. Here's a write-up on a 600RR (likely the same as your bike):
http://cbrworld.net/forums/thread/248171.aspx

_____________________________

'05 600RR Purple/Black