Turn Signals (Full Version)

CBR Forum >> This 'n' That >> Product Reviews

Turn Signals

  

Mstngdrew232 -> Turn Signals (1/17/2007 2:02:55 AM)

Anyone seen these? They any good?

http://cgi.ebay.com/ebaymotors/honda-CBR-600-F2-F3-F4-F4I-BLACK-SMOKE-TURN-SIGNALS_W0QQcmdZViewItemQQcategoryZ35598QQihZ001QQitemZ110079445650QQrdZ1

  
hondadriver4life -> RE: Turn Signals (1/17/2007 12:26:23 PM)

those are ok but all they are is your basic run of the mill universal mount turn signals and in my opinion i would rather have the proton flush mounts from greggs

FATHEADS1KRR -> RE: Turn Signals (1/17/2007 1:27:27 PM)

I had a set of those on my old 02 f4i. ( they were on the used plastics I bought on ebay after a wreck) They worked ok, and I painted the lil rear cover part to match the bike, which looked good. Not very unique, but for $18, I'm guessing your not trying to win any motorcycle show !!

Icefox -> RE: Turn Signals (1/17/2007 2:01:50 PM)

I had some similar to those on my F4i. I had to shave off the lip around the area where the stock signals mounted to the fairings. The only two major problems I had was that I couldn't change to anything else once I cut off those lips to smooth it down, and once I overtightened the screw that held on the cover and it broke part of the inside so it would never sit tight against the base. Other than that, I think they looked good and they were fairly bright.

Triax -> RE: Turn Signals (1/25/2007 12:15:28 PM)

They work really well but you have to drill into your fairing and they are rather large. I had a set on my red F3 and i painted the black portion of the turnsignal red so they weren't as noticable.

Northernfirepower -> RE: Turn Signals (3/29/2007 4:06:19 PM)

I had them on my F3 when I bought it and didn't care for them from the start. They work fine though, so it's your choice

D2VW14_20 -> RE: Turn Signals (3/29/2007 4:33:46 PM)

They arent going to fit flush over the existing whole, atleast on the RR they dont. There is a gap in the front.

ze9900 -> RE: Turn Signals (5/20/2007 6:44:30 PM)

they suck [:'(] i had them on my 03 rr and i had to drill my farings. they withstood a couple of falls though... so they are pretty tough.

900rrjunkie -> RE: Turn Signals (5/21/2007 7:02:20 PM)

 I like the ones i have they have 2 small wires coming out of that back and thats it the rest is a big sticky pad that you have to cut down to fit you bike . Also you have to run leds or something if you state requires amber's. I tucked mine in to the vent holes cant see them to well from the side but it looks good up front. Ill pull the mids off thisweekend and post a better pic of the underside.

[image]local://upfiles/15648/6D4ECF60E81A4815A613E417C86C7EB0.jpg[/image]

[image]local://upfiles/15648/E8300DAC01C54F97A1404FDF6DDC9679.jpg[/image]

  

Page: [1]

Return to CBR Forum home page or view the Full Version of this page.