929 Fuel Pump problems

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

929 Fuel Pump problems

Printable Version

CBR Forum >> General >> General Tech >> 929 Fuel Pump problems

Page: [1]

Message

<< Older Topic Newer Topic >>

929 Fuel Pump problems - 8/30/2005 1:30:13 AM

zandi

Posts: 2
Joined: 8/25/2005
Status: offline

Hi. New to the site, like what I see.

I am hoping someone has seen a problem like this. I have a 2000 929 that I laid down about 2 - 2.5 years ago. In doing so I cracked both both halves of the engine case. I have replaced it with a 2001 engine from a bike that was in a fire. No problems until I tried to start it. When I turn the key on, the fuel pump does not turn on.

After reading the manual, I have verified the fuel cut relay, engine stop relay, bank angle sensor, engine stop switch are all good. when I check the fuel pump, the 3P black connector only gets 7.41 V with the ignition switch on.

If I plug in the fuel pump directly, it sounds like it works.

Does anyone know why there would only be 7.41V at the fuel pump connector?